D-Link Web Smart Switch DGS-1210-16 Reference Manual - page 102
Command Line
Interface
D-Link Web Smart Switch User Manual
9
9
6
6
Restrictions
None.
Example usage:
To reboot the Switch:
DGS-1210-24:admin#reboot
Are you sure you want to proceed with the system reboot?(y/n) y
% Device will reboot, please wait a few minutes to re-login.
Success.
DGS-1210-24:admin#
reset config
Purpose
This command is used to reset the Switch’s configuration to the
factory default settings.
Syntax
res et config
Description
All the Switch’s configurations will be reset to the default settings.
Parameters
None
.
Restrictions
None.
Example usage:
To reset all of the Switch’s parameters to their default values:
DGS-1210-24:admin#reset config
% Device will reboot after reset configuration successfully.
DGS-1210-24:admin#
show ipif
Purpose
This command is used to display the configuration of the IP
interface on the Switch.
Syntax
s how ipif
Description
The
s how ipif
command displays the current IP interface
configuration of the switch.
Parameters
None.
Restrictions
None.
Example usage:
To display the IP interface settings: