D-Link Web Smart Switch DGS-1210-16 Reference Manual - page 57
Configuration
D-Link Web Smart Switch User Manual
5
5
1
1
Figure 4.57 – L2 Functions > LLDP > 802.1 Extension TLV Port Settings
From Port / To Port:
A consecutive group of ports may be configured starting with the selected port.
Port VLAN ID:
Specifies the port VLAN ID TLV to be enabled or disabled.
VLAN Name:
Specifies the VLAN name TLV to be enabled or disabled in the LLDP port. If enabled, users
can specify the content of
VLAN ID
,
VLAN Name
or
All
.
Protocol Identity:
Specifies the Protocol Identity TLV to be enabled or disabled in the LLDP port. If enabled,
users can specify the
EAPOL
,
LACP
,
GVRP
,
STP
or
All
.
Click
Apply
to implement the changes made. Click
Refresh
to refresh the table information.
The 802.3 Extension LLDP Port Settings window displays 802.3 Extension LLDP port information and
contains parameters for configuring 802.3 Extension LLDP port settings.
L2 Functions > LLDP > 802.3 Extension TLV