D-Link WebCruiser DFM-560EL User Manual - Trouble-Shooting Guide
Trouble-shooting guide
Q1: How can you connect the modem?
- Power down your computer.
- Using the cable provided, connect it to one of the serial port on your
computer. Please refer to this installation guide page 5.
- If there is none left, please unplug one of the other devices (not
mouse) and plug into that port.
- Power it up and Windows will detect it and then follow the
instructions.
Q2: You do not know where to start. How can you install the
modem?
- After completing the steps in Q1, follow the graphic example as
shown in this modem installation guide page 7.
Q3: How can you test if the modem is installed properly or not?
- Go to Start > Settings > Control Panel > Modems > Diagnostics tab
- You should see a new modem installed on one of the COM port (eg.
COM2 56000kbps V.90 modem). It could be COM1 or COM2
depending on your computer.
- Select the COM port with your modem, Click on “More Info...”
button
6