D-Link xStack DES-3528P Series Hardware Installation Manual - Rear Panel Description
xStack
®
DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
9
Rear Panel Description
The DES-3528 rear panel contains ports 27 and 28, (1000BASE-T), an AC power connector, and an outlet for an
optional external RPS.
Figure 1- 11. Rear panel view of the DES-3528
The DES-3528P rear panel contains ports 27 and 28, (1000BASE-T), an AC power connector, and an outlet for an
optional external RPS.
Figure 1- 12. Rear panel view of the DES-3528P
The DES-3552 rear panel contains ports 51 and 52, (1000BASE-T), RS-232 DCE Diagnostic port (console port), an
AC power connector, and an outlet for an optional external RPS.
Figure 1- 13. Rear panel view of the DES-3552
The DES-3528P rear panel contains ports 51 and 52, (1000BASE-T), RS-232 DCE Diagnostic port (console port), an
AC power connector, and an outlet for an optional external RPS.
Figure 1- 14. Rear panel view of the DES-3552P
The AC power connector is a standard three-pronged connector that supports the power cord. Plug-in the female
connector of the provided power cord into this socket, and the male side of the cord into a power outlet. The Switch
automatically adjusts its power setting to any supply voltage in the range from 100 ~ 240 VAC at 50 ~ 60 Hz.
The rear panel also includes an outlet for an optional external power supply. When power fails, the optional external
RPS will take over all the power immediately and automatically.
The rear panel of the DES-3528DC includes ports 27 and 28, (1000BASE-T), and an opening designed to
accommodate the DC power wiring assembly. See the installation instructions in Section 2 for details.
Figure 1- 15. Rear panel view of the DES-3528DC
Side Panel Description
The left and right-hand panel of the DES-3528 and DES-3528DC Switches contain a heat vent. The heat vents are
used to dissipate heat. Do not block these openings, and leave at least 6 inches of space at the rear and sides of the