1. DL manuals
  2. D-Link
  3. Switch
  4. xStack DGS-3610 Series
  5. Hardware Installation Manual

D-Link xStack DGS-3610 Series Hardware Installation Manual - Preface

Other manuals for xStack DGS-3610 Series: Configuration Manual

Summary of xStack DGS-3610 Series

  • Page 1

    Xstack dgs-3610 series hardware installation guide version 1.2.

  • Page 2

    Dgs-3610 series hardware installation guide revision no.:v1.0 date: 2008/6/13 copyright statement all rights reserved. D-link corporation reserves all copyrights of this document. Any reproduction, excerption, backup, modification, transmission, translation or commercial use of this document or any ...

  • Page 3: Preface

    Preface thank you for using our switches. This manual provides you with detailed operation guide that allows you to easily install and use the switches. Scope this manual describes the functions and physical features of the switches, and provides the installation procedures, troubleshooting procedur...

  • Page 4

    Documentation cd-rom: the documentation of d-link switches is stored in the cd-rom package, which is provided to you together with the product you purchase. The cd-rom is updated frequently, and may be more current than the printed documents. Obtaining technical assistance d-link corporation provide...

  • Page 5: Contents

    1 contents 1 product overview ................................................................................................................................ 1-1 1.1 product overview .......................................................................................................................

  • Page 7: Product Overview

    Dgs-3610 series h/w installation guide chapter 1 product overview 1-1 1 product overview 1.1 product overview the dgs-3610 series is a new generation of 10g multi-layer chassis switch developed by d-link that features high performance, high-security, intelligence and ease of use. The dgs-3610 switch...

  • Page 8

    Chapter 1 product overview dgs-3610 series h/w installation guide 1-2 upgrade to the 10g uplink backbone network by simply adding 10g modules for protecting user investment; scenarios where numerous 1000m ports are needed to provide high-performance data processing; high-performance multi-layer swit...

  • Page 9

    Dgs-3610 series h/w installation guide chapter 1 product overview 1-3 in order to ensure the security of devices, prevent hackers’ attack and control devices, ssh (secure shell) and snmpv3 can encrypt management information in the process of telnet and snmp; it can control the access of unauthorized...

  • Page 10

    Chapter 1 product overview dgs-3610 series h/w installation guide 1-4 supporting smooth upgrade to the 10g backbone by simply adding various 10g modules to meet flexible expansion and high bandwidth transmission needs; sntp can ensure the exact timing of switch and can keep the same with time server...

  • Page 11

    Dgs-3610 series h/w installation guide chapter 1 product overview 1-5 l2 protocol ieee802.3, ieee802.3u, ieee802.3z , ieee802.3x, ieee802.3ae, ieee802.3ak, ieee802.3ad, ieee802.1p, ieee802.1x, ieee802.3ab, ieee802.1q (gvrp), ieeee802.1d, ieee802.1w, ieee802.1s, igmp snooping v1/v2/v3, lldp defeat do...

  • Page 12

    Chapter 1 product overview dgs-3610 series h/w installation guide 1-6 802.1q vlan 4k acl standard ip acl (ip address based hardware acl) extended ip acl (ip address based and tcp/udp port number based hardware acl) mac extended acl (source mac address based, destination mac address based and optiona...

  • Page 13

    Dgs-3610 series h/w installation guide chapter 1 product overview 1-7 dem-331t/r (wdm transceiver, single-mode 40km) dem-412x: 1-port xfp interface 10g conversion board dem-412cx: single port 10g stack module. Dem-421xt (10gbase-sr, multi-mode, 300m) dem-422xt (10gbase-lr, single-mode, 10km) dem-423...

  • Page 14

    Chapter 1 product overview dgs-3610 series h/w installation guide 1-8 storage temperature -40ºc - 70ºc humidity operating humidity: 10% ~ 90% rh storage humidity: 5% - 90% rh 1.3 product appearance figure 1-1 appearance of the dgs-3610-26 figure 1-2 appearance of the dgs-3610-26g figure 1-3 appearan...

  • Page 15

    Dgs-3610 series h/w installation guide chapter 1 product overview 1-9 table 1-4 leds on the front panel identification applicable model description detailed information status dgs-3610-26 dgs-3610-26g dgs-3610-50p system status led off: the switch is not powered on. Flashing green: the switch is ini...

  • Page 16

    Chapter 1 product overview dgs-3610 series h/w installation guide 1-10 item status description orange flashing 10/100m act table 1-6 identifications on the backplane identification description detailed information xe1 10g extended port 1 10g extended port of the switch, to be used with our dem-412x ...

  • Page 17

    Dgs-3610 series h/w installation guide chapter 1 product overview 1-11 figure 1-5 dem-412cx 10g stack module.

  • Page 18: Installation

    Chapter 2 installation dgs-3610 series h/w installation guide 2-12 2 installation 2.1 prior preparation this switch is already prepared for installation at delivery. Before connecting the power supply and the network, please check all the accessories against the packing list in the packaging carton....

  • Page 19

    Dgs-3610 series h/w installation guide chapter 2 installation 2-13 figure 2-1 schematic diagram for installing the handle the above figure shows the schematic diagram for installing the handle on the switch. There are eight screw holes on the handle. Align the handle with the screw holes on the side...

  • Page 20

    Chapter 2 installation dgs-3610 series h/w installation guide 2-14 figure 2-2 schematic diagram for installing the l-shaped fastening bracket step 2 fasten the switch onto the rack, as shown in the following diagram. You should prepare the screws needed for rack mounting by yourself. Figure 2-3 sche...

  • Page 21

    Dgs-3610 series h/w installation guide chapter 2 installation 2-15 switch. When you plug the rj- 45 connector, you should hear a “click”, which means that the connector is plugged tightly. Warning do not insert a phone connector into the rj-45 port, as this may damage the switch. Caution ensure that...

  • Page 22

    Chapter 2 installation dgs-3610 series h/w installation guide 2-16 caution you must use the 3-pin power socket with a ground end, and the distance between the power socket and the switch should be no more than 1.8 m. For more reliable grounding, ground the grounding terminal at the rear panel of the...

  • Page 23: Troubleshooting

    Dgs-3610 series h/w installation guide chapter 3 troubleshooting 3-1 3 troubleshooting 3.1 common troubleshooting procedures symptom possible cause solution forgetting the management interface login password please contact the d-link customer service department for technical support. The status led ...

  • Page 25

    Dgs-3610 series h/w installation guide appendix a connectors and connection media a-1 a connectors and connection media a.1 1000base-t/100base-tx/10ba se-t port the 1000base-t/100base-tx/10base-t is a port that supports adaptation of three rates, and automatic mdi/mdix crossover at these three rates...

  • Page 26

    Appendix a connectors and connection media dgs-3610 series h/w installation guide a-2 figure a-3 shows the connections of the straight-through and crossover twisted pairs of the 100base-tx/10base-t. Figure a-3 connections of the twisted pairs of the 100base-tx/10base-t straight-through crossover a.2...