D-MAX DCC-601DV Manual - page 23
23
- SEL POS : Determines which of the 4 vertices of each MD area is to be used.
- YPOS : Determines the coordinate of the vertical axis for SEL POS.
- XPOS : Determines the coordinate of the horizontal axis for SEL POS.
- FILL→SET : Fills in a selected MD area. Fills in a selected MD area. The color of filling is sequentially
selected as brown, orange, blue, cyan, yellowish green, yellow and red.
- RETURN : Select this to save the MOTION DET menu settings and return to the SPECIAL menu.
☞ Note
• MD areas show only MOTION DET menu. Therefore, MD areas don’t display on the monitor screen.
● PRIVACY : Hide an area you want to hide
on the screen.
①
When the SPECIAL menu screen is
displayed, press the Up and Down buttons
so that the arrow indicates ‘PRIVACY’.
①
Set up the mode using the 4 direction buttons.
- AREA SEL : You can select up to 8 MD areas.
- AREA MODE :
Determines whether to use the area selected
in the AREA SEL, and the size and position of
the area.
- MASK COLOR : Determine area color. You can select Gray,
Green, Red, Blue, Black, White.
- TRANSP : Determine the transparency of selected area as
controlling number from 0 to 3.
- RETURN : Select this to save the PRIVACY menu settings and return to the SPECIAL menu.
● DIS (Digital Image Stabilizer) :
This function mitigates any picture movement due to external factors such as wind.
● COMM ADJ (Communication Adjustment) :
This function sets up the camera communication status when
controlling the camera through an external control device.
①
When the SPECIAL menu screen is displayed, press the Up
and Down buttons so that the arrow indicates ‘COMM ADJ’.
②
Set up the mode using the 4 direction buttons.
- CAM ID : Determines the camera's identification number
(between 0 and 255).
- BAUD RATE : You can select 2400/4800/9600/19200/38400/57600 bps.