Summary of DIC-5830DV
Page 1
Ir vandal dome camera 사용 설명서 용 서 dic-5830dv 650tvl, d-fog manual.
Page 2
2 the lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point wi...
Page 3
3 the camera needs periodic inspection. Contact an authorized technician for inspection. Stop using your camera when you find a malfunction. If you use your camera around smoke or unusual heat for a long time, fire may be caused. Do not install the camera on a surface that can not support it. Unless...
Page 4
4 1.Features --------------------------------- 6 2. Cable connection & osd control --------------------------------- 7 3. Setup menu operation --------------------------------- 8 4. Troubleshooting --------------------------------- 19 5. Dimensions --------------------------------- 20 6. Specificati...
Page 5
☺ ultra high resolution 650 tv lines clear image quality has been achieved by employing a double-speed sony ccd with 410,000(effective) pixels, which provides a horizontal resolution of 650 tv lines. ☺ visual distance & smart ir it is 0.1lux at color mode and its led will be lit at lower light enabl...
Page 6
6 1) cable connection ( dc12v type ) (dual type dc12/ac24v) 2) osd control ① 3axis bracket - please loosen screws and fix tilted and panned position. ③ lens : vari-focal auto iris lens ( 2.8mm ~ 12.0mm / f1.2 ) with icr osd pcb - setup button : used for the menu display. This button can be used to c...
Page 7
7 • menu structure lens dc / video / manual exposure shutter auto / flk / manual / 1/60 agc low / middle / high / off sense-up auto / off return back light off / dwdr / blc / hsblc white bal atw / awb / awc-set / manual day & night auto / ext / night / color smart 3dnr off / on f-dnr off / manual / ...
Page 8
8 wish to change mode. When the left or right button is pressed, available values and modes are displayed in order. Please keep pressing the button until you get to the mode you wish to operate. ④ please select 'exit' and then press the setup button to finish the setting. Note) • if arrow appears at...
Page 9
9 • low / middle /high area: select area and then adjust size and position of the area. Default: initialize all data you set. ▶ dwdr when there are both bright and dark areas at the same time, this mode makes both areas distinctive. Low level: set lower level (0~15) high level: set high level (0~15)...
Page 10
10 please select the mode you wish to operate by pressing the left or right button. ▶ color: the picture is always displayed in color. ▶ auto: the mode is switched to ‘color’ in a normal environment, but switches to ‘b/w’ mode when ambient illumination is low. - delay: adjusting converting speed for...
Page 11
11 7. F-dnr (defog) this camera supports defog function which does a process of clearing blurred image caused by fog and snow by analyzing the brightness of input image and compensating the color of the image ▶ off: deactivates f-dnr. ▶ f-dnr manual this function is operated manually level: select l...
Page 12
12 area: select the programmed area that can be set up to 4 areas. Area display: turn on and off the programmed motion area. Value: adjust motion sensitivity of the programmed motion area. Motion view: turn on and off the display when motion detected. ▶ off: cancel motion detection function. 2) priv...
Page 13
13 sharpness: adjust sharpness of the video picture monitor: select the kind of the monitor (lcd / crt) osd color: user can select osd color ▶ crt: select this menu when using a crt monitor. - ped level: adjust ped level. - color gain: adjust color gain ▶ lcd: select this menu when using a lcd monit...
Page 14
14 phase of multiple cameras using the power synchronization function (line-lock) without using a synchronization signal generator. • int : internal synchronization type • l/l : power synchronization type, line-lock press the set button and you can select a desired phase between 0 and 359. Synchroni...
Page 15
15 if you have trouble operating your camera, refer to the following table. If the guidelines do not enable you to solve the problem, contact an authorized technician. • nothing appears on the screen. - check that the power cord and line connection between the camera and monitor are fixed properly. ...
Page 16
16 5. Dimensions.
Page 17: 6. Specifications
17 ▪ general signal system ntsc pal image sensor 1/3” sony had ccd∥ total pixels 811(h) Χ 508(v) 795(h) Χ 596(v) effective pixels 768(h) Χ 494(v) 752(h) Χ 582(v) resolution 650 tv lines (b/w 0lux) scanning frequency 15.734khz(h), 60(v) 15.625khz(h), 50(v) shutter speed 1/60 ~ 1/100,000 sec 1/50 ~ 1/...