D-MAX DIC-5830DV Manual - page 13
13
SHARPNESS: Adjust sharpness of the video picture
MONITOR: Select the kind of the monitor (LCD / CRT)
OSD COLOR: User can select OSD color
▶
CRT: Select this menu when using a CRT monitor.
- PED LEVEL: Adjust PED level.
- COLOR GAIN: Adjust COLOR GAIN
▶
LCD: Select this menu when using a LCD monitor
- GAMMA: Adjust GAMMA level
- PED LEVEL: Adjust PED level.
- COLOR GAIN: Adjust COLOR GAIN
LENS SHADING: When setting the zoom to maximum and Lens angle of view are
saturated on screen, set ON to make the Lens edge invisible.
It might happen only if fluorescent light is shined fully on screen.
DEFECT: When the camera has white defect in the CCD with ages, user can restore it
using OSD menu.
- Sense-up: User can adjust white defect according to luminous condition.
- DIFF: User has to select level(1~4) according to size of the white defect. If it is big, you
have to select high number
- START: Before pressing the Start menu, you have to cover camera lens using lens cap
5) CAMERA TITLE
If the TITLE is input, the camera TITLE appears on the monitor.
Select an ID from A,B~Y,Z, 0,1~8,9.
Note) If the wrong name has been input.....
•
If you press the SETUP button after moving the
cursor to CLR, all the letters will be erased. If you want
to correct a letter, please move the cursor to the arrow
at the bottom left of the screen and press 'SET'.
•
Please position the cursor above the letter you wish
to correct, and then move the cursor on to the letter
you wish to choose and press the SETUP button.
•
When a name has been chosen, please select a position for the name display.
▪
Please move the cursor onto 'POS' and then press the SETUP button.
▪
The name will appear at the top left corner.
▪
Please find the position you wish to display the name in by using the 4 directional
buttons,
and then press the SETUP button.
▪
Please select 'END' and then press the SETUP button to complete ID input.
6) SYNC
In areas where the supply is at 60Hz/NTSC (50Hz/PAL), you can synchronize the output
IMAGE ADJ
1. SHARPNESS IIIIIIIII 0~31
2. MONITOR CRT↙
3. LENS SHADING ON↙
4. DEFECT ↙
5. RETURN