D-MAX DMS-200 User Manual - page 19
④ GROUP SET: User can set maximum 12 groups
Select a channel then move to next page after
pressing F/F key
• The Preset point in the Group that 12 Preset
points are set is observed repeatedly and in
order with regular speed and time.
▷▶
⑤ Tour SET Group : User can set continual Group
motion that can be put 12 Groups in 1 Tour
Move to the setting page if user presses F/F key
on this menu.
▪ The Group user wants to set must be set first.
Setting is only possible when Preset is set first
in the state of setting of Swing, Group, Tour,
otherwise, it displays the message “Sorry Undefined”.
⑥ Run Function: Operate one of SWING/ GROUP/
TOUR/ TRACE. (It is operated automatically
after the end of OSD menu.)
▪ User can look at how to set TRACE at “18. TRACE SET PAGE”
⑦ RETURN MENU PAGE : Move to a higher menu
page when control the joystick Right/Left in the
selection of this menu.
● [P]: Set Preset points (1~250)
● [S]: Moving speed (1~64)
● [T]: Dwell time
① Set Preset ② Next setting ⑥ Out of menu
③ Set moving speed ④ Next setting after saving
⑤ Set dwell time
>
- Preset set CH : 001
- Preset PTZ SET
- Preset Swing SET
- Group SET CH : 001
- Tour SET Group
- Run Function : UNDEF
- RETURN MENU PAGE
Press F/F Set Mode
>
T01:
01
T02:00 T03:00 T04:00
T05:00 T06:00 T07:00 T08:00
T09:00 T10:00 T11:00 T12:00
Press F/F Save, F/N(ESC)
Set the value of “00” part of T01~T12 to Group
channel that User wants, then the setting is saved
when user is out of the menu after pressing F/F key.
①Select Group ②Set next ③Out of menu saving
channel Channel after channel
*Set / Stop order with a control keyboard without
menu on the screen.
>
- Preset set CH : 001
- Preset PTZ SET
- Preset Swing SET
- Group SET CH : 001
- Tour SET Group
- Run Function : UNDEF
- RETURN MENU PAGE
Press F/F Set Mode
RUN
STOP
Preset
Swing
Group
Tour
1~250 +
1(PAN)
or +
2(TILT)
1~12 +
or
or
or