D-MAX DMS-200 User Manual - page 20
18. TRACE SET PAGE
Set TRACE.
User can regenerate and save a change of
The unrestricted location of ZOOM In/Out
and a position of the camera by hand-worked
control with a joystick
It displays the screen when moves the joystick to
Right/Left after fixing the cursor on the menu
▪ How to set TRACE.
Move to [SET] after pressing .
∇
Check – Control scenes that user wants by hand-
worked with a joystick after the message
“Set Trace: OO%” on the middle of the
screen. If user finishes this part
Move to [SAVE] with
It goes a higher menu after being saved data when
pressing
with a display of the message “Save TRACE”.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
19. ALARM CH ON/OFF
■
What is ALARM function?: It operate to observe
the location of the camera which is memorized previo-
usly in the situation of the warning signal or trespass-
ers by using a sensor.
- CH On/Off: Alarm Input – Each channel can be ON/OFF
- Alarm Relay: It can be set On or not when ALARM OUTPUT
PORT operate wrong.
- Active Alarm: It selects ACTIVE OPEN or ACTIVE CLOSE
by tangency when something is wrong. It is ACTIVE
when ALARM INPUT is OPEN in ACTIVE OPEN, it is
ACTIVE when ALARM INPUT is CLOSE in ACTIVE CLOSE.
∇
- Resume Time Set :
It can select the waiting time that the camera move to
the place alarming to observe where wrong signal is
sensed. User can set it for 1sec to 180sec and operate
GROUP, TOUR, SWING again in a preset time.
SWING, GROUP, TOUR are operated in a preset time
when user stops the operating joystick in the case of
not connecting with the ALARM. Press SWING, GROUP,
TOUR keys without stopping of the joystick to stop the
operating completely.
(*Stopping the operating with the joystick affects the
SET function.)
>
15. Select Alarm : Sensor
16. Motion Detection : Off
17. PRESET & RUN PAGE
18. TRACE SET PAGE
19. ALARM CH ON/OFF
20. ALARM PRESET SET PAGE
21. PRIVACY ZONE SET PAGE
- PREV MENU PAGE
- NEXT MENU PAGE
>
15. Select Alarm : Sensor
16. Motion Detection : Off
17. PRESET & RUN PAGE
18. TRACE SET PAGE
19. ALARM CH ON/OFF
20. ALARM PRESET SET PAGE
21. PRIVACY ZONE SET PAGE
- PREV MENU PAGE
- NEXT MENU PAGE
>
[SET]
[SAVE] [DELETE] [ESC]
F/F Save Return, F/N Select
>
- CH1 :Off -CH2 :Off
- CH3 :Off -CH4 :Off
- Alarm Relay :Off
- Active Alarm :Close
- Resume timeset :Off
- RETURN MENU PAGE