D-MAX DWC-540DV Manual - page 12
12
4. WB CONTROL (White Balance Modes)
White Balance is a function which compensates different colors of light being emitted from
different light sources.
Users can select the above levels as they desire according to the environment.
•
AUTO (Auto Tracking White Balance)
The Auto Tracking White Balance (ATW) mode
continuously monitors color temperature.
With WB Control set to ATW, color
temperature & White balance can be
automatically adjusted accordingly.
•
ATWDesat ( ATW Desaturating )
When WB is set to ATWDesat, the Extended Color temperature is desaturated i.e when
there is a excess of light temperature , ATWDesat Function is used as well as it reduces
the Noise. The limits of the color temperature setting remain 2000K and 11,000K.
•
AWC (Auto White Balance)
When set to AWC, Color temperature of the Light is automatically adjusted.
•
Manual ( Manual White Balance )
Manual White Balance (MWB) Mode is used when other White Balance Options are failed.
5. AGC
Automatic Gain Control is a feature which adjust automatically according to the incoming
Signal.
By positioning the arrow to 'AGC' on the SETUP menu with the help of UP and DOWN
buttons ,you can select the Mode you wish to go
•
AUTO: The Sensitivity increases automatically
when the light is low.
•
OFF : A Low Noise Picture is obtained under a
low light.
•
As the level of gain increases, the screen gets
brighter and the level of noise also increases.
SETUP PAGE
LENS & VIDEO I/O SETUP
RESOLUTION HIGH
WDR AUTO
▶
WB CONTROL AUTO
ATWDes
AWC
MANUAL
AGC AUTO
DNR AUTO
SENS & MOTION-UP DSS CONTROL
EXIT
SETUP PAGE
LENS & VIDEO I/O SETUP
RESOLUTION HIGH
WDR AUTO
WB CONTROL AUTO
▶
AGC AUTO
OFF
LOW
HIGH
HLGHER
HI’EST
DNR
AUTO