D-MAX DWC-540DV Manual - page 19
19
1. MIRROR
Select “OFF” to show the image as normal. Select “ON” to reflect image horizontally.
2. FREEZE
When frame repeat count is set to 0, the same image continues to repeat until the property
value is changed. This has the effect of a “freeze frame.”
Note: If frame repeat count is set to 0 (Freeze), the user should NOT be allowed to do a
save user settings, as this will cause an inconsistent state with no loaded image at
boot/reset
.
3. SHARPNESS
The outline of the video image becomes cleaner and more distinctive as the level of
SHARPNESS increases. If the level goes up excessively, however, it may affect the video
image and generate noise.
•
The available range of level is -8 ~ 8.
SPECIAL PAGE 2
MIRROR OFF
ON
▶
FREEZE OFF
15 Frms
SET
SHARPNESS - 8 --▪-- 8
FLICKERNESS OFF
FLUORESCENT LIGHT ON
FACTORY RESET
SPECIAL PAGE 2
▶
MIRROR OFF
ON
FREEZE OFF
SHARPNESS - 8 --▪-- 8
FLICKERNESS OFF
FLUORESCENT LIGHT ON
FACTORY RESET
SYSTEM INFORMATION FW Rev
SAVE & RETURN
8. SPECIAL PAGE 2 MENU
SPECIAL PAGE 2
MIRROR OFF
ON
FREEZE OFF
▶
SHARPNESS - 8 --▪-- 8
FLICKERNESS OFF
FLUORESCENT LIGHT ON
FACTORY RESET
SYSTEM INFORMATION FW Rev
SAVE & RETURN