D-Parts B-Speech Tx2 User Manual - Playing Music

GB

- 17 -

Playing music

1. Insert the connector of the turned on B-Speech® TX2 

into the 3,5 mm socket of the source device.

2. Make sure the receiver is turned on and within10 meters

of the B-Speech® TX2.

3. The red and blue LED from the B-Speech® TX2 indicates

that a Bluetooth connection exists by flashing slowly at 

same time. 

4. If the connection disappears, the sound is disrupted or

breaks down: Move the receiver nearer to the TX2. 

Put the receiver in search mode and it will connect 

again automatically. If the connection does not automati-

cally follow, start the pairing process again.  

Please note:

1. If for any reason the B-Speech® TX2 does not play any

music, it should be restarted.(See chapter about pairing.) 

2. Normally, the connection between the transmitter and the

receiver is established once the pairing process is done. 

The connection can break for the following reasons: 

- The distance between the devices is greater than 10

meters or an obstacle stands between the devices.

- One or both of the devices have been turned off or 

must be recharged.