1. DL manuals
  2. D.T.Systems
  3. Pet Care Product
  4. Micro-iDT PLUS Series
  5. Owner's Manual

D.T.Systems Micro-iDT PLUS Series Owner's Manual

Other manuals for Micro-iDT PLUS Series: Owner's Manual, Owner's Manual
Manual is about: Electronic dog trainer "Super trainer"

Summary of Micro-iDT PLUS Series

  • Page 1

    Super trainer super trainer tm tm micro-idt™ plus series electronic dog trainer owner’s manual • micro-idt™ plus (one dog trainer with add-on capability).

  • Page 2: Notice!

    2 notice! According to how you use your transmitter, the transmitting range might be much different. You will have more range if you use your transmitter apart from your body as follows: maximum range typical range minimum range.

  • Page 3: Table of Contents

    3 table of contents • table of contents ........................................... 3 • introduction .................................................... 4 • package contents .......................................... 5 • model features .............................................. 5 • parts & func...

  • Page 4: Introduction

    4 congratulations and thank you for purchasing our micro-idt™ plus training collar with add-on capability. It offers the maxx-range™ internal antenna system, the industry’s only internally woven antenna in the collar. With up to a 900 yard range, they are perfect for use around the house and versati...

  • Page 5: Package Contents

    5 package contents • transmitter* • collar receiver • rechargeable batteries for the collar (already installed in collar unit) • battery charger • splitter/adaptor charging cable • test light • owner’s manual *9-volt transmitter battery not included model features • digital technology • up to 900 ya...

  • Page 6: Transmitter

    6 transmitter parts & functions intensity selection dial the intensity selection dial can be set from level 1 to level 16 to find the exact stimulation level for your dog (see page 16). Intensity selection dial collar selecting switch antenna led indicator light vibration button magnet indicator (re...

  • Page 7: Collar Selecting Switch

    7 collar selecting switch switching between collar units can be controlled by moving the toggle selection switch to the desired unit. Remote training buttons pressing the “nick” button will make the collar re- ceiver give a momentary, or ‘nick’ stimulation. Press- ing the “cont” button gives a conti...

  • Page 8: Parts & Functions

    8 parts & functions collar receiver battery charging receptacle smartled indicator light magnetic switch indicator (red mark) contacts collar belt with embedded re- ceiver antenna contacts contacts should fit snugly against the dog’s neck to ensure good skin contact. See page 15 for more information...

  • Page 9: Note

    9 battery charging receptacle the battery charging receptacle is located on the side of the collar receiver. Always close the jack with the rubber plug after charging to prevent foreign particles from getting inside the charging receptacle. Note the unit is still waterproof even if water gets into t...

  • Page 10: Smartled

    10 smartled when the collar unit is on: • the smartled flashes green once every other second when 51% to 100% battery charge is remaining. • the smartled flashes red once every other second when 21% to 50% battery charge is remaining. • the smartled double-flashes red onceevery other second when the...

  • Page 11: Note

    11 micro-idt™ plus seriescollars are equipped with rechargeable nickel metal hydride (nimh) batteries, which are not memory sensitive and do not require depletion before recharging. Although batteries come partially charged from the factory, it is recommended that they are given a full charge (about...

  • Page 12: Turning On and Off

    12 turning on and off the transmitter is always in a permanent sleep state. It is only on when a button is being pressed and does not need to be turned off by the user. Note if the smartled on the collar unit double-flashes while on, the unit will need to be recharged. If the smartled double-flashes...

  • Page 13: Testing

    13 to test the electronic stimulation 1. Place the tester firmly on the contacts of the collar receiver. 2. Set the intensity (note - an intensity level setting of 4 or less might not be enough to light the tester). 3. Push the ‘nick’ or ‘cont’ button. 4. The tester light will quickly flash once whe...

  • Page 14: Programming

    14 programming when adding an “add-on” collar, the collar will need to be programmed to the transmitter. If your current collar unit is not responding to the transmitter, it may also need to be reprogrammed to the transmitter. 1. Select the desired collar selecting switch position on the transmitter...

  • Page 15: Properly Fitting The Collar

    15 note: proper collar tightness and position are very important to insure safe and consistent collar use. All electronic collars need to be very snug around the dog’s neck to work properly. They must be just tight enough to allow the “contacts” or electrodes to make good contact on your dog’s skin....

  • Page 16: Setting The Intensity Level

    16 it is very important to set the correct intensity level on your micro-idt plus training system before beginning your training sessions to provide the proper level of stimulation without over-stimulating your dog. 1. Place the intensity selection dial so that the system is set on level 1. 2. Turn ...

  • Page 17: Maintenance

    17 maintenance it is very important to periodically clean your micro- idt™ plus seriessystems for maximum performance. Regular cleaning will also lengthen the life of your unit. • clean the micro-idt™ plus series collar box with lukewarm water and a mild anti-bacterial soap. • take care to thoroughl...

  • Page 18: Important Safety Notes

    18 important safety notes • before training, your dog should be examined by a veterinarian to assure that your dog is in good health. • never leave your dog unattended with the unit on. Since no electronic device is perfect, there is a very slight possibility that your dog may receive an unintention...

  • Page 19: Warranty

    19 warranty all micro-idt™ plus trainer systems have a one year parts and labor warranty effective from the original date of purchase. A copy of the original sales receipt is required to validate the date of purchase. The micro-idt™ plus trainer has been made with state of the art equipment. Any fin...

  • Page 20

    20 2872 walnut hill lane dallas, texas 75229 tel: (214) 350-9446, (888) 588-8364 fax: (214) 350-7847 website: www.Dtsystems.Com e-mail: customerservice@dtsystems.Com 1-idt plus 2011.06.07 printed in korea.