D3 Media LCD Media Player User Manual - page 10
9
Choose different days of the week by pressing
, navigation buttons. Choosing a day is
confirmed by pressing
button. Then “INPUT” instruction will be displayed in the upper left
corner of the screen. Press
, navigation buttons to make changes between ON and OFF.
“ON” means 5 sets of timers are valid on this day, while “OFF” means the function has been
cancelled.
If any other option is required, press
again, “OPTION” characters will be shown in the
upper left corner of the screen. Press the
, button to make a choice. “ON” in a certain day
means 5 sets of timers will be applied to this day.
Note:
Weekly timer can be switched between “ON” and “OFF” by repeated pressing of the
“CANCEL” button.
Press “TIMING/A-B” button again, the screen will appear as shown in (picture 6):
(PICTURE 6)
On H/On M: sets the hour and minute for automatic power on function
Off H/Off M: sets the hour and minute for automatic power off function
On each line enter the desired start and finish time, with a maximum of 5 operating times
available.
Choose “ON”/“OFF” in the first row to activate or cancel the timer function
▲▼ , : buttons are for navigation.
: button is confirmation of your choice, the upper left corner of the screen
will display “Input”, and then timing information can now be entered.
Use
, to make a choice between “ON” and “OFF” (on the first line) OR
use the number key pad to enter the chosen time.
Press the
to enter your choice, “Options” will be displayed on the upper left
corner of the screen. Press the ▲▼ , buttons to make choices.
The screen underneath will show whether the settings conflict by displaying “valid” or “invalid”.
More than 2 minutes must be allowed between each ON and OFF period, otherwise the timer will
show the “invalid” message.
Note: Pressing the “CANCEL” button can reset the day timer to “OFF” and will set the hour/min
timer to “0”