Da-Lite SCB-200 Instruction Book - page 9
9
2. Type RS232 command and press enter. The full suite of
RS232 commands found in the SCB-200 instructions can be
used. The SCB-200 will respond back to acknowledge
commands given with a “!” point in front.
Optional Controllers (continued)
For DHCP click on "Obtain IP address automatically" and type in
the DHCP HostName. For Static IP leave the option "Use the
following IP configuration" clicked and type in the IP address and
Subnet Mask. Then click the "OK" button. Finally click on the
"Apply Settings" in the left menu.
OK Button
Apply Settings
NET-200 Usage
To control the screen connected through the SCB-200 to the
NET-200, you will need to create a TCP/IP Winsock connection
through HyperTerminal or other emulator program.
1. Create a TCP/IP Winsock connection through HyperTerminal
or other emulator program.
Host Address: 192.168.1.100
Port Number: 10001