Installation instructions discovery ® touch-control induction cooktop models dytt305n and dytt365n part no. 109374 rev. A.
Cabinet cutout dimensions ............................................. 6 installation instructions .................................................... 8 verifying the package contents ....................................... 8 installing the chassis ....................................................
1 important safety instructions caution hazards/unsafe practices that could cause minor per- sonal injury or property damage. Warning hazards/unsafe practices that could result in severe personal injury or death. General precautions dacor includes these precautions to promote the proper function and...
2 important safety instructions warning • concerning cooktop service/maintenance: - before service, verify that power to the cooktop is turned off at the circuit-breaker panel or fuse box. - before installing/servicing unit, switch power off at the service panel, then lock the panel to prevent power...
3 installation specifications electrical specifications important this appliance’s electrical-connection lead wires may be a smaller gauge than is installed in your home; nevertheless, the national electric code and/or local inspection authority specify that smaller-gauge wires are compatible with t...
4 cooktop clearance/ventilation this section provides information on cabinet clearances and ventilation surrounding the cooktop. Under-counter clearance for proper ventilation, maintain: • at least 5 3/4” (14.6 cm) clearance from the countertop to any surface below (incl. Upper edges of drawers) • 1...
5 installation specifications • chassis depth is 1/2” wider and deeper at the base of the glass cooking surface. • cooking surface overhangs the top of the chassis by 3/4” (1.9 cm) in front, back, and on both sides. Appliance dimensions all tolerances: ±1/16 (±1.6 mm), unless otherwise stated this s...
6 callout description 1 30” min. Clearance from cooktop surface and bottom of unprotected wood or metal cabinet 2 distance to combustible side wall (either side): 2 1/4” (5.7 cm) min. From edge of cooktop surface. 3 if the cooktop side of the upper cabinetry is more than 2 1/4” (5.7 cm) to the left/...
7 installation specifications cabinet cutout dimensions, cont. All tolerances: +1/16 (+1.6 mm), -0, unless otherwise stated. Countertop flush-cutout dimensions—for down-draft vent (top view) width dimensions model a b dytt305 30 1/8” (76.5 cm) 28 3/4” (73.0 cm) dytt365 36 1/8” (91.8 cm) 34 3/4” (88....
8 4. Slide the brackets into the slots on the left and right sides of the chassis, then tighten the screws to the underside of the countertop. (do not overtighten the screws.) connecting the cooktop wiring warning • to prevent electric shock or fire hazard, turn off power at the circuit-breaker pane...
9 three-wire electrical connection important no white-wire connection is needed for this 3-wire appli- ance. If the junction box has a neutral (white) wire, you must shield it to comply with the national electrical code. 1. Separate the wires coming out of the appliance conduit. 2. Connect the black...
10 installation instructions verifying proper operation read the accompanying use and care manual completely before using the cooktop. This procedure instructs you how to verify the basic opera- tion of each cook zone. Refer to the use and care manual to verify operation of other features (e.G., tim...
11 wiring diagrams.
12 wiring diagrams.
13 notes.
Dacor ● 14425 clark avenue, city of industry, ca 91745 ● phone: (800) 793-0093 ● fax: (626) 403-3130 ● www.Dacor.Com.
