Dacor DYF42BNDI Dimensions - Dyf42Bndi, Dyf48Bndi

All specifications subject to change without notice.

Phone: (800) 793-0093

www.dacor.com

PLANNING

GUIDE

DYF42BNDI, DYF48BNDI

Discovery 42” and 48” Wide

Built-In Custom Panel Refrigerators

Document # PG11-013

Revised 02/04/13   Page 3/5

NOTE: Additional space may be required depending on the overlay panel 

thickness (see below).

To adjust the door swing, see the installation instructions.

Allow a minimum of 4½” (11.4 cm) of space between the side of the 

refrigerator and a corner wall. More clearance may be needed if thicker 

custom panels or custom handles are used. Do not overlook baseboards.

refrigerator to  

Cabinet Clearance

Door Swing 90°

Door Panels and Cabinetry Clearance - Door Swing 110°

The custom door panels and adjacent cabinetry must be designed so that 

there is sufficient clearance for the doors to swing open. If the refrigerator is 

to be installed close to the wall, see Door Swing 90°.

Door Swing Dimensions

The location must permit both doors to open to a minimum of 90°. Allow 

4½” (11.4 cm) minimum space between the side of the refrigerator and a 

corner wall.

Model DYF42BNDi

130

˚

130

˚

90

˚

90

˚

110

˚

110

˚

47

7

⁄

8

"

(121.6 cm)

41

1

⁄

2

"

(105.4 cm)

16

7

⁄

8

"

(42.9 cm)

12

 5

⁄

8

"

(32.1 cm)

37

1

⁄

4

"

(94.6 cm)

41

3

⁄

8

"

(105.1 cm)

130

˚

130

˚

90

˚

90

˚

110

˚

110

˚

51

3

⁄

8

"

(130.5 cm)

44"

(111.8 cm)

19

1

⁄

4

"

(48.9 cm)

14

3

⁄

8

"

(36.5 cm)

39"

(99.1 cm)

43

7

⁄

8

"

(111.4 cm)

Model DYF48BNDi

Spacer Panel

¼" (6.35 mm)

¾" (1.9 cm)

1" (2.5 cm)

½" (1.3 cm)

1"

1 ¼"

1 ½"

1"

(2.5 cm)

1 ¼

(3.2 cm)

"

1½

(3.8 cm)

"

Refrigerator

Side Trim

Door

Hinge

Ba

cker 

P

anel

Overl

ay 

P

anel

(2.5 cm)

(3.2 cm)

(3.8 cm)

(1.3 cm)

Cabinetry

(1.9 cm)

½"

¾"

When the doors are closed the 

refrigerator will extend beyond 

the face of the adjacent cabinets 

to some degree.

NOTE: Rout the hinge side 

of the custom door panels to 

a radius that is equal to at 

least half the thickness of the 

panel if a 130° door swing is 

desired. See 

the installation 

instructions.

refrigerator to  

Cabinet Clearance

Door Swing 110°

Refrigerator

Side Trim

Door

Ba

cker 

P

anel

Overl

ay 

P

anel

Hinge

Spacer Panel

Cabinetry

90˚ Door

Stop Position

¼" (6.35 mm)

¾" (1.9 cm)

¾"

(1.9 cm)

1" (2.5 cm)

½" (1.3 cm)

½"

(1.3 cm)

1"

(2.5 cm)

1"

(2.5 cm)

1 ¼

(3.2 cm)

1½

(3.8 cm)

(1.3 cm)

(1.9 cm)

½"

¾"