Dacor Epicure OB36 Installation Instructions Manual

Manual is about: 36”, 52” Wide Outdoor Grills 16” Wide Side Burner

Summary of Epicure OB36

  • Page 1

    Installation instructions epicure ® outdoor grill models: ob36, obs36, ob52 obs52, obsb162 part no. 102032 rev. E tested in accordance with the latest edition of ansi z21.58 2006 ● csa 1.6-2006 standard for outdoor cooking gas appliances. In canada: installations must be in accordance with the curre...

  • Page 3

    Installation instructions .................................................. 10 preparing for installation ................................................ 10 cabinet installation ......................................................... 12 cart installation ............................................

  • Page 4

    Important safety instructions read the use and care manual completely before using this appliance. Use this appliance only for its intended use as described in the use and care manual. Use it only to cook food. It is not designed for commercial, industrial or laboratory use. If you receive a damaged...

  • Page 5

    Important safety instructions warning keep items that could explode, such as aerosol cans away from the grill and burners. Do not store flammable or explosive materials in adjacent cabinets or areas. Do not use towels or bulky cloth as pot holders. To avoid the possibility of fire, do not leave the ...

  • Page 6

    Important safety instructions to reduce the risk of injury to persons in the event of a grease fire: warning general safety precautions (continued) to reduce risk of fire, electric shock, serious injury or death when using your appliance, follow basic precautions, including the following: planning t...

  • Page 7

    9 1/8" (232mm) 23 3/4" (603mm) 26 1/2" (673mm) 27 1/8" (689mm) 16" (406mm) planning the installation 9 1/8" (232mm) 23 3/4" (603mm) 26 1/2" (673mm) 27 1/8" (689mm) 52" (1321mm) 26" (660mm) door depth: 1/4” (6mm) deep return on frame edge cut-out for outdoor grill 21” (533mm) width accessory doors ob...

  • Page 8

    Warning this installation must conform to local codes or, in the absence of local codes, with either the national fuel gas code, ansi z223.1/nfpa 54, natural gas and propane installation code, csa b149.1, or propane storage and handling code, b149.2. Prevent grill combustion products from being draw...

  • Page 9

    Planning the installation junction box trim frame (accessory) 3/4" (19mm) min. To any material* 10" (254mm) min. To combustibles 2" (51mm) min. To non-combustible 1/4" (6mm) 23" (584mm) 24" (610mm) rotisserie mounting bracket (factory installed) junction box trim frame (accessory) 3/4" (19mm) min. T...

  • Page 10

    Planning the installation 3/8" (10mm)ø both sides 6" x 7" (152mm x 178mm) utility cutout 25" (635mm) 8" (203mm) min. To combustibles above the countertop surface 1 1/4" (32mm) 12 1/8" (308mm) 2" (51mm) ob(s)36 - 33 1/2" (851mm) ob(s)52 - 49 1/2" (1257mm) 6" x 6" (152mm x 152mm) utility cutout for ob...

  • Page 11

    Location planning - cart installations above the cooking surface, both sides: 3” (76mm) min. To non-combustibles 10" (254mm) min. To combustibles above cooking surface, behind unit: 3” (76mm) min. To non-combustibles 10" (254mm) min. To combustibles planning the installation maintain all minimum cle...

  • Page 12

    0 parts list models ob36, obs36, ob52 & obs52: a drip tray g rotisserie rod and forks b smoker box h rotisserie motor c warming rack j light lens prystick d regulator assembly match holder e grills cleaning cream f flame spreaders models ob52, obs52 & obsb162 k side burner grate m side burner heads ...

  • Page 13

    D installation instructions e f g h p j n k l m whole house natural gas or lp regulator lp cylinder regulator obs162, ob36, obs36 (pn 72310) lp cylinder regulator ob52, obs52 (pn 101578) d d.

  • Page 14

    Installation instructions cabinet installation warning to avoid an explosion hazard, do not connect the cart or appliance(s) to electrical power until after the gas supply system has been checked for leaks. Important to prevent damage to the gas regulator, install the regulator only after the applia...

  • Page 15

    Optional side shelf installation install the front mounting bracket for the right side shelf. Use two (2) of the provided button head fasteners and two (2) lock washers. Tighten into place using a 5/32” allen wrench. 1. Installation instructions bracket lock washer button head fastener slide the slo...

  • Page 16

    Connecting the gas gas connection - natural gas notes units equipped for use with natural gas ship with a regulator assembly with 3/4” pipe attached and an additional 3/4” nipple. The regulator assembly is also equipped with a 3/4” to 1/2” reducer on the inlet side. • • connect the factory supplied ...

  • Page 17

    Put the burner heads on to the burner bases. Line up the slots on each head with the pins on the base so that it lies flat. Put the burner caps on top of the burner heads. Line up the slots on each cap with the pins on the base so that it lies flat. Put the grate over the top of the side burner. Lin...

  • Page 18

    Installation instructions final assembly and test (cont.) lp cylinder installation - some models warning the largest recommended lp cylinder size for the rollout tank shelf on the cart is five gallons. A five gallon portable liquid propane cylinder should be approximately 12 inches (305mm) in diamet...

  • Page 19

    Installation instructions with the tank shelf open, connect the power cord from the outdoor grill and the warming oven (if equipped with one) to the electrical outlet on the back panel inside the cart. Connect the rotisserie motor power cord to the electrical outlet on the back side of the cart. Pow...

  • Page 20

    Copyright © 2007 by dacor inc. All rights reserved. Web site: www.Dacor.Com phone: (800) 793-0093.