Installation instructions epicure ® outdoor grill models: ob36, obs36, ob52, obs52, obsb162 part no. 102032 rev. F tested in accordance with the latest edition of ansi z21.58 2006 ● csa 1.6-2006 standard for outdoor cooking gas appliances. In canada: installations must be in accordance with the curr...
All specifications subject to change without notice. Dacor ® assumes no liability for changes to specifications. © 2008 dacor, all rights reserved. California proposition 65 warning the burning of gas cooking fuel generates some by-products that are on the list of substances which are known by the s...
1 installation instructions .................................................. 10 preparing for installation ................................................ 10 cabinet installation ......................................................... 12 cart installation ..........................................
2 important safety instructions read the use and care manual completely before • using this appliance. Use this appliance only for its intended use as • described in the use and care manual. Use it only to cook food. It is not designed for commercial, indus- trial or laboratory use. If you receive a...
3 important safety instructions warning do not use towels or bulky cloth as pot holders. • do not wear loose or hanging apparel while using • this appliance. Do not allow clothing to come into contact with the cooking surface. Inspect the gas hose and regulator assemblies • before each use of this a...
4 9 1/8" (232mm) 23 3/4" (603mm) 26 1/2" (673mm) 27” * (686mm) 36" (914mm) 25 1/8" (638mm) product dimensions planning the installation 9 1/8" (232mm) 23 3/4" (603mm) 26 1/2" (673mm) 27" * (686mm) 52" (1321mm) 25 1/8" (638mm) * total depth from back to front of handles is 30” (762mm) ob36 and obs36 ...
5 planning the installation 9 1/8" *** (232mm) 23 3/4" (603mm) 26 1/2" (673mm) 27" ** (686mm) 16" (406mm) cut-out for outdoor grill overall height overall width ** total depth from back to front of knobs is 28 5/8” (727mm) *** total height with cover is 12” (305mm) door depth: 1/4” 6mm) obsb162 obad...
6 planning the installation location planning - general gas and electric power requirements prior to installation, the gas supply for natural gas or • whole house lp installations must meet the specifica- tions below. For natural gas or whole house lp installations, have a • qualified plumber or gas...
7 planning the installation location planning - enclosed cabinets maintain all minimum clearances specified on pages 7 • and 8. For proper outdoor grill operation, provide a flat, level • mounting surface with minimum 3/4” thickness. All models are designed to allow installation in combus- • tible o...
8 planning the installation location planning - enclosed cabinets (continued) 3/8" (10mm)ø both sides 6" x 7" (152mm x 178mm) utility cutout coutertop 25" (635mm) 24" (610mm) 8" (203mm) min. To combustibles above the countertop surface, both sides 1 1/2" (38mm) 12 1/4" (311mm) 2" (51mm) ob(s)36 - 33...
9 planning the installation location planning - cart installations example of grill cart location maintain all minimum clearances shown between the • appliance and all surfaces behind and to the side of the appliance. Allow 26 inches minimum in front to open and close the • cabinet drawers. For prop...
10 parts list models ob36, obs36, ob52 & obs52: a drip tray g rotisserie rod and forks b smoker box h rotisserie motor c warming rack j light lens pry stick d regulator assembly match holder e grills cleaning cream f flame spreaders models ob52, obs52 & obsb162 k side burner grate m side burner head...
11 installation instructions d e h l n m p j k f g d d whole house natural gas or lp regulator lp cylinder regulator obs162, ob36, obs36 (pn 72310) lp cylinder regulator ob52, obs52 (pn 101578).
12 cart installation warning attach the appliance to the cart with all of the sup- • plied bolts before use. All gas and electrical connections should be made • after the grill is installed and bolted to the cart. To avoid an explosion hazard, do not connect the • cart or appliance(s) to electrical ...
13 optional side shelf installation install the front mounting bracket for the right side 1. Shelf. Use two (2) of the provided button head fasten- ers and two (2) lock washers. Tighten into place using a 5/32” allen wrench. Slide the slot on the inside of the shelf over the pin on 2. The mounting b...
14 install an approved flexible gas line from the regulator 3. To the gas line shut off valve. Gas connection - lp gas cylinder hose connect the supplied 3/4” coupling/nipple to the gas 1. Inlet at the back right bottom corner of the appliance. Connect the included lp cylinder hose to the nipple. 2....
15 installation instructions final assembly and test assemble the grill open the hood on the unit. 1. Insert the drip tray completely into the slot on the front 2. Of the unit. Put the flame spreaders on the floor of the appliance, 3. Inside the hood. The large holes go toward the front of the unit....
16 installation instructions final assembly and test (cont.) lp cylinder installation - some models warning the largest recommended lp cylinder size for the • rollout tank shelf on the cart is five gallons. A five gallon portable liquid propane cylinder should be approximately 12 inches (305mm) in d...
17 if the second or third attempt to ignite the burner is 6. Not successful then turn all burner controls to the off position. If the grill or cooktop fails to operate properly, ensure 7. That the electrical power supply and gas supply are turned on and that all installation steps have been care- fu...
Dacor ● 1440 bridge gate drive, diamond bar, ca 91765 ● tel: (800) 793-0093 ● fax: (626) 403-3130 ● www.Dacor.Com.
