Dacor Millennia ETT304-1 Planning Manual - page 3
PLANNING
GUIDE
www.Dacor.com
Phone: (800) 793-0093
Specifications are subject to change without notice.
See installation instructions for additional details.
3.3
30 Inch and 36 Inch Wide,
Millennia
®
Electric Cooktops
Stiffener
Cabinet face
Countertop
Floor
3/8” Min. (10 mm) space
behind raised vent
chassis to clear stiffener
3/8” Min. (10 mm)
flat countertop overhang
required behind cutout
ERV or PRV series raised
vent: Check raised vent
dimensions/specifications
to determine proper fit
ETT or MET series cooktop
19 3/4"
(502 mm)
1" Min.
(25 mm)
1" Min.
(25 mm)
1" Min.
(25 mm)
Cabinet
face
A
B
C
D
E
6" (152 mm) Min.
from mounting surface to
combustibles below
cooktop chassis
Rear
wall
Stiffener
Cabinet face
Countertop
Floor
5/8” Min. (16 mm) space
behind raised vent
chassis to clear stiffener
5/8” Min. (16 mm)
flat countertop overhang
required behind cutout
RV series raised vent:
Check raised vent
dimensions/specifications
to determine proper fit
ETT or MET series cooktop
Erv AND Prv sErIEs rAIsED vENt INstALLAtIoN
sIDE vIEW
rv sErIEs rAIsED vENt INstALLAtIoN
sIDE vIEW
CoUNtErtoP CUtoUt (WIth rAIsED vENt)
toP vIEW
CoUNtErtoP CUtoUt (WIth rAIsED vENt)
Iso vIEW
Ett304-1, Ett365-2, MEt304 and MEtb365-1
All tolerances: +1/16”, -0, (+1.6 mm, -0) unless otherwise stated
Document # PG03 - 001
Revised 08/20/09 Page 3/3
Model/Configuration
A - Cooktop
Cutout Width
B - Raised Vent
Cutout Width
C - Total Cutout
Depth
D - Raised Vent
Cutout Depth
E - Minimum
Rear Countertop
Overhang
ETT304-1 or MET304 cooktop with ERV30
or PRV30 raised vent
28 3/4”
(730 mm)
27 3/4”
(705 mm)
22 1/2”
(572 mm)
2 3/4”
(70 mm)
3/8”
(10 mm)
ETT304-1 or MET304 cooktop with
RV30 raised vent
22 1/4”
(565 mm)
2 1/2”
(64 mm)
5/8”
(16 mm)
ETT365-2 or METB365-1 cooktop with
ERV36 or PRV36 raised vent
34 3/4”
(883 mm)
33 3/4”
(857 mm)
22 1/2”
(572 mm))
2 3/4”
(70 mm)
3/8”
(10 mm)
ETT365-2 or METB365-1 cooktop with
RV36 raised vent
22 1/4”
(565 mm)
2 1/2”
(64 mm)
5/8”
(16 mm)