Dacor Preference Renaissance RGC304 Installation Instructions Manual - page 10
8
Installation Instructions
Single Burner
Assembly
Dual Burner
Assembly
Igniter
Grate
Cap cover
Cap cover
Burner cap
Skirt
Burner head*
Burner head
Burner base
Wide side down!
Line up notch
with igniter
Installing the Burner Components
WARNING
Never attempt to operate the cooktop with any of the
•
burner parts removed.
Do not attempt to adjust the burner air mixture set-
•
tings. All adjustments are preset at the factory.
Remove the burner heads, burner rings, burner caps
1.
and grates from their shipping packages.
Install the burners as shown. When installing the burn-
2.
er components, twist each piece back and forth until it
drops completely into place. The burners will not oper-
ate properly unless all of the burner pieces are properly
seated.
Gently set the grates on top of the spill tray. Make sure
3.
that the rubber feet are positioned in the dimples.
* The burner head on the dual burner assembly
is permanently attached to the burner base. It
cannot be removed by the customer.