Daewoo DSA-101L Service manual - page 51

48

¡

DSA-101L/DSA-121L (Before)

PROCEDURES PHOTOS 

1.Stop the air conditioner and disconnect the wire from Indoor Unit to

Outdoor Unit.

2. Disassemble the case. (Fig 1~2)

!

Remove the Top Panel. (Loosen two screw and remove six hook)

@

Remove the Front Cabinet. (Loosen four screw and four hook)

#

Remove the Side Cabinet and Back Cabinet. (Loosen eight screw)

3. Removing the Propeller Fan. (Fig 3)

!

Loosen the Nut for fixing the Propeller Fan.

@ 

Remove the Plain Washer.

# 

Remove the Propeller Fan.

4. Removing the Motor ODU. (Fig 4)

!

Loosen four screw at Bracket Motor.

@ 

Disconnect the wire at Control Panel and remove Motor ODU.

5. Removing the Dual Capacitor. (Fig 5)

!

Disconnect the wire at Control Panel.

@ 

Loosen a screw at Clamp Capacitor.

# 

Remove the Dual Capacitor.

6. Removing the Over load Protector. (Fig 6~7)

!

Loosen a Hex Nut at Terminal Cover.

@ 

Remove the Terminal Cover.

# 

Remove the wire at Over load Protector.

$ 

Remove the Over load Protector.

Fig 1

Fig 2

Fig 3

Fig 5

Fig 4

Fig 6

Fig 7