Daewoo DSJ-4710CRU Service Manual - page 7
Manual is about: REAR PROJECTION TV
of
69
6
4. Adjusting Method
Adjustment of temporary ITC
Step 1. Temporary fixation of DY
1) Insert DY in R, G, B CRT and tighten the screws properly with DY pushed upward to the end
(Refer to Figure 1)
2) Adjust the slant and position of DY so that the rectangle projections of DY are shown in front
of the set.
(Figure 1. Front part of CRT assembly)
Step 2. Fixation of VM coil
1) Tighten the screw completely with R, G, B, VM coil pushed upward to the end (Refer to
Figure 1)
Applied chassis and model:SJ-113/DSJ-4710(20)
DY rectangle
projection
GENTERING
MAGNET
VM COIL