Daewoo HC-4180HWL Instruction Manual - page 7
12
11
Getting
Started
◆
Before connecting
●
Refer also to the instruction manual of the TV.
●
When you connect the machine to the TV, be sure to turn
off the power and unplug both the units from the wall
outlets before making any connections.
●
Connect the machine to the TV directly. If you connect the
machine to a VCR, TV/VCR combination, or video selector,
the playback picture may be distorted as DVD videos are
copy protected.
●
Note that one video connection cable for monitor out is
supplied.
●
Automatically switched to the TV set A/V mode(DVD,
Video)
Do not change to Video Aspect Ratio.
Connecting to a TV without Color Difference Inputs
●
If the TV or monitor is equipped with an S video input, make the S video connection in addition to the normal video connection.
The S video connection will provide higher quality picture playback.
●
HDMI Connector :
- HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection for use with DVD
Players, Set-Top Boxes, and other AV devices.
- If you have a HDMI TV or monitor, you can connect it to this unit using a HDMI cable.
- When you use HDMI connection, you can change the resolution (480p, 720p, or 1080i) for the HDMI output by setting the
RESOLUTION in SETUP function.
Connecting to a TV with Color Difference Inputs
If the TV or monitor is equipped with the color difference inputs, select the connection on the above.
Connecting to these inputs allows you to enjoy higher quality picture playback compared to the above connection.
for EU version: optional
SCART cable
HDMI cable
●
21-Pin SCART Cable(not included) to 21-pin SCART input terminal on TV
●
SCART Specification : Composite and Component Video output(DVD, Video)Audio L/R Output(DVD only)
Connecting to a TV
Connecting Speakers
Notes
●
Actual labels for color difference inputs may vary depending
on the TV manufacturer (ex. Y/Cb/Cr, Y/R-Y/B-Y , Y/P
b
/P
r
or
Component video).
●
In some TVs or monitors, the color levels of the playback
picture may be reduced slightly or the tint may change.
In such a case, adjust the TV or monitor for optimum
performance.
Caution
●
You may need to maximize the volume of the TV
speaker(s) when you carry out steps in "Speaker Setup".
●
Be sure to turn down the volume of the TV speaker(s)
before changing the TV source input and using the TV
speaker(s) as a normal TV speaker(s).
◆
Before connecting
●
This machine is designed to reproduce optimum sound quality when speakers with the specified impedance below are
connected. Please check the following information and choose speakers with appropriate impedance for the connections.
Front speakers / Center speaker / Surround Speakers : 6 ohms min. per speaker
Woofer speaker : 4 ohms min.
●
To prevent damage to circuits, never short-circuit the positive (+) and negative (-) speaker wires.
●
Do not connect the speaker cable to the L and R connectors at the same time and do not connect more than one speaker to the same
speaker connectors.
Surround speaker
Surround speaker
Center speaker
Woofer speaker
Active subwoofer B
[USER Optional]
Audio Input
Front speaker
Left ch.
Front speaker
Right ch.
Left ch.
Right ch.
Active subwoofer A
[USER Optional]
Audio Input
Wireless Rear
Speaker System
Wireless Rear Speaker
System Antenna
Gray
Yellow
Blue
Red
Green
Brown
◆
Standard speaker placement
For ideal Surround effects, all speakers should be installed.
Front
The left, right, and center speakers should face the seated listener and be
placed at ear level. The center speaker reproduces a richer sound image by
enhancing the perception of the sound's source and movement.
Surround
Place the left and right Surround speakers 1 meter (3 feet) above the listener's
ear level and facing toward the sides of the room, making sure that the listener
is within the speakers' dispersion angle. These speakers reproduce the feel of
a moving sound while creating the sensation of being in the middle of the
action.
Speaker placement plays an important role in the reproduction of Surround sound. The placement of the speakers varies
depending on the size of the room and the wall coverings used in the room. The illustration below shows an example of a layout
for standard speaker placement. Refer to this example when you position the speakers in order to experience the best of
Surround sound.
Positioning Speakers
Woofer
Install a subwoofer for powerful bass sounds. The placement of the subwoofer does not affect the final quality of the sound
image too much, so you can install it wherever it is convenient.
*Note that installing too close to the TV may make a distortion the TV screen.