Ip / analog surveillance camera dn-16050 / dn-16051/dn-16052/dn-16052 quick installation guide.
1. Hardware overview 1.1 rear panel connector / button description reset default this button is hidden in the pinhole. Press and hold the reset button until the network camera rebooted. This will reset all parameters, including the ip address to factory default settings. Power indicator when the cam...
Installation 2. Installation 2.1 install the hardware this camera can be installed in two ways: ceiling-mounted and desktop. During the installation, please make sure the upper side of the camera is always facing up, as shown in figure 1 below, regardless of which installation way you’re using. This...
3. Assemble the bracket: a). Align the stem with the central hole of the base, and rotate it to secure, as shown in figure 3. B). Align the joint lock with the stem, and rotate it to secure, as shown in figure 4. Figure 3: connect the stem to the base figure 4: connect the joint lock to the stem 4. ...
3.2 assign an ip address and access the camera step 1. Install the software place the supplied video viewer ap software cd into your dvd- / cd-rom drive. The installation process will automatically start. Follow the on-screen instructions to install the application programs. After installation, a “v...
