Wireless 11ac 433mbps dual band usb 2.0 adapter quick installation guide dn-70560 • dn-70565 dn-70560 dn-70565.
Driver installation please follow the following instructions to install your new wireless usb adapter: 1. Insert the usb wireless network card into an empty usb 2.0 port of your computer when computer is switched on. Never use force to insert the card, if you feel it’s stuck, flip the card over and ...
Click ‘ install driver ’ to start the installation procedure 4. Installation descriptions shown. Click ‘ next ’ to continue 5. Once the installation is finished the computer will be asked to reboot. You can click ‘ finish ’ and reboot the computer to finish the installation of driver files.
6 . Insert the usb wireless network card into an usb 2.0 port of your computer, the system will find the new hardware and will install the drivers automatically..
7 . After finishing driver installation, click adapter utility from your taskbar or programs folder. Click “ available networks ”, select the wireless access point you would like to connect and press “ add to profile ” button. 8 . Fill in the security information if any requirement, and then click “...
9 . Connected successfully. It will show the status screen. Hereby assmann electronic gmbh, declares that this device is in compliance with the requirements of directive 2014/53/eu and the directive 2011/65/eu for rohs compliance. The complete declaration of conformity can be requested by post under...
