Digix TAB-720 User Manual - page 6
4
2.4 Power-on/off
1. Power-on: When the battery is fully charged, press the power switch
for two seconds to power on the device. At that time, the device will vibrate
once. After powered on, the system will enter the screen-locking interface,
where you can move up the unlocking icon to enter the main interface and
down to the icon of
you
electronic photo frame to enter the interface where
2. Power-off: Press the power switch for four seconds, and the system
will pop
the power-off slider at the
up a interface for confirmation. Glide
bottom of the screen, and the device will be turned off. At that time, it will
vibrate once. Move up the power-off icon, the system will return to the
3. Sleep mode: Press the power switch for one second, and the system
will enter the sleep mode, in which the LCD screen will turn black. In this
mode, you can press power key to wake up the system. Once waken up,
the system enters the screen-locking interface. To save energy, if
electricity is insufficient in sleep mode, the system can power off itself
2.5 USB Connected
1. Use the USB cable that we attached to connect your Digix tablet
mini USB port.
2.
Glide
3. Tap USB connected.
5. Tap OK on the “turn on USB storage” button that is displayed.
and tap turn
off USB storage.
can play the pictures.
power-off interface.
after it is automatically powered on.
Then tap “turn on USB storage” on the lower part of your tablet.