Dimenco Displays DM504MAS User Manual - page 11
Display User Manual
Dimenco Displays
April 11, 2013
©2013 Dimenco Displays B.V.
11 of 15
3 Scope of supply, Set up and mounting
3.1 Scope of Supply
The contents of the box:
• Display DM504MAS
• Mains cords (EU)
• DVI cable
• Quick installation guide
• Cardboard box with cushions
The following items can be purchased separately:
• Table stands
3.2 Image retention
IMPORTANT: Always display alternating content with your application. If a still image in high
contrast remains on the screen for an extended period of time, it may leave an 'after-image' or
'ghost image' on the front of the screen. This is a well-known phenomenon, caused by the
shortcomings inherent in the LCD technology. Please note that the after-image symptom cannot
be repaired and is not covered under warranty.
3.3 Connecting the display
NEVER (dis)connect DVI when your PC or Display is on.
PC
DVI cable
Power cord
DVI cable
2D monitor
(optional)
3D Display
A second 2D display may be connected to the PC. Only use a DVI cable and graphics card that
is compliant with the DVI standard (see reference to DVI standard in section 6).
Make sure the PC and display are switched off!
• Connect the PC via the provided DVI cable to the top DVI connector (the one closest to the
power connector) on the backside of the display.
• Connect the power cord.