Dimenco Displays DM504MAS User Manual - page 3
Mounting
The display can be placed on a table stand or wall-mounted. A table stand is not supplied
with the display, but can be purchased separately. Furthermore, the display can be
mounted with VESA 400x400 (MIS-F) compliant universal wall supports, ceiling supports
or universal floor stands. Upon selecting a mount the weight of the display (45 kg) should
be taken into account.
Fitting the table stand
For use of the separately available table stands, make sure that the fasteners are properly
tightened. Never use a makeshift stand, or legs fixed using wood screws.
Using a VESA mount
The standard VESA mount holes on back of the display allow the user to install the 3D
display on any VESA MIS-F compatible wall support, ceiling support or floor stand.
Important: Use a VESA MIS-F compatible support suitable for the weight of this 3D
Display.
Positioning the display
For the best results, choose a place where there is no direct light shining onto the screen,
and which is some distance away from radiators or other sources of heat. Leave a space
of at least 10 cm all around the display for ventilation, making sure that curtains, cupboards
etc. cannot obstruct the airflow through the ventilation apertures. The display is intended
for use in a public places only and should never be operated or stored in excessively hot or
humid conditions.