E-Collar Einstein ET-1202TS Owner's Manual - Stimulation Button (

- In 1D Mode, you can change the intensity level of 1D by rotating the 

dial and locking it. 

(See “LOCK/UNLOCK THE STIMULATION INTENSITY LEVEL” for 

details) The intensity level of 2D will be same as that of 1D unless it is 

locked.

- In Tapping Sensation Mode, you can send only a tapping sensation 

to each collar receiver. We purposely made it easy to switch back and 

forth from tapping sensation to stimulation with one button control.

- In 2D Mode, you can change the intensity level of 2D by rotating the 

dial and locking it. The intensity level of 1D will be same as that of 2D 

unless it is locked.

Momentary/Continuous Button “M/C”

- M/C Button on the backside of the transmitter allows the user to 

switch between Momentary Stimulation and Continuous Stimulation. 

- If Continuous Stimulation is selected, pressing stimulation buttons 

(1D or 2D) will send stimulation to the collar receiver for the duration 

of the button being pressed.  After 10 seconds the Over-Stimulation 

feature will stop the stimulation until the button is released and 

pressed again. 

Stimulation Button (

1D

) 

- In 1D/2D Mode, Sends momentary or continuous stimulation to the 

Dog 1 collar receiver based on the state of Momentary/Continuous 

Button. 

- If Mode Button(M) is pressed 

while the

 Stimulation Button(1D) is 

pressed, it will send boosting stimulation.  

BUTTON FUNCTIONS

14

Einstein Owner's Manual 802TS / 1202TS