E-Collar Technologies Barkless Pro BP-504 Owner's Manual - page 3
LCD DISPLAY
BARK COUNTER
The BP-504 defaults to the Bark Counter Mode when turned on or is brought
out of sleep mode. Please note that the Bark Counter will not count barks
when the 5 seconds safety delay feature is activated. The bark counter is
designed to count the number of times the collar is activated not the total
number of barks.
To reset the counter simply press and hold the control button for 2 seconds
or until the display resets to Zero.
HOW TO PROGRAM THE BP-504
1. Cycling through the different modes.
-
Pressing the control button briefly will cycle through the five modes
( Bark Counter, Stimulation Level Setting, Sensor Sensitivity,
Pavlovian Tone ON/OFF Setting, and Test Mode )
2. Changing mode setting.
-
Display the mode you desire to change and press the control button
for 2 seconds until the tone sounds and display begins to blink.
-
Once the unit is in programming mode simply pressing the control
button will cycle the unit through the available settings for that
mode.
-
To save the setting that is displayed simply press the control button
for 2 seconds until the tone sounds and the display stops blinking.
-
Inactivity for 10 seconds will also save the mode setting and return
the unit to the bark mode.
3. Normal operating state.
-
When the unit is on and not in programming mode the display will
turn off and the battery indicator will continue to flash green or red
if it needs to be charged. Pressing the control button will display the
bark counter.
STIMULATION MODES
The BP-504 can be set to Zero Stimulation ( L0 ) with tone on or off. When set to
zero and tone is off it will count barks which may be useful in testing the bark
sensor. Remember it will wait 5 seconds after each count before it counts
another bark.
Eight different stimulation levels are available to accommodate the varying sizes
and temperaments of dogs. The levels are displayed L1 – L8.
The “Auto Mode” is displayed as L9. In Auto mode the unit will start at level 1
and increase one level for every 2 activations until it reached level 8. When the
dog stops barking for 10 seconds it will reset to level 1.