E-FLITE Ultra Micro FPV Vapor Instruction manual - Flight Battery Charging
4
EN
CAUTION: Only use a charger specifically
designed to charge a Li-Po battery. Failure to do so
could result in fire, causing injury or property
damage.
CAUTION:Neverexceedtherecommended
charge rate.
CAUTION: Alwaysdisconnecttheflight
battery from the charger immediately upon
completion of charging.
Chargingafullydischarged(notover-discharged)
150mAhbatterytakesapproximately45minutesat
thecharger’s300mAchargerate.TheLEDgoesout
when the charge is complete.
Flight Battery Charging
USB Li-Po
Charger
EFLC1008
SOLID RED LED
–Charging
DC Input:5.0V 350mA
DC Output:4.2V 300mA
LED OFF
–Charge
Complete
USB Li-Po
Charger
EFLC1008
SOLID RED LED
–Charging
DC Input:5.0V 350mA
DC Output:4.2V 300mA
LED OFF
–Charge
Complete
USB Li-Po
Charger
EFLC1008
SOLID RED LED
–Charging
DC Input:5.0V 350mA
DC Output:4.2V 300mA
LED OFF
–Charge
Complete
LED Indications
CHARGING
(SolidRed)
..............................
MAX CHARGE
(off)
...................................
45
MIN.
1. Charge flight battery.
2. Install flight battery in aircraft (once it
hasbeenfullycharged).
3. Bind aircraft to transmitter.
4.Makesurelinkagesmovefreely.
5. Perform Control Direction Test with
transmitter.
6.Setdualrates.
7.Adjustcenterofgravity.
8.PerformaradiosystemRangeCheck.
9. Find a safe and open area.
10. Plan flight for flying field conditions.
11.ChecktheoperationofFPVsystem.
12.Setflighttimerfor5minutesforfirst
flight.