Instructions for the installation and maintenance of household instantaneous indoor lpg gas water heater type b (vent-pipe) model no: jsd 12 e lpgsasa permit no: _______ e–gas systems: the proven preferred choice.
Contents 1. Important notes and precautions for use 1 2. Description of the appliance 2 2.1 performance layout 2 2.2 main technical data & features 3 2.3 description of control functions 3 3. Instructions for the installer 4 3.1 technical information 4 3.2 installation 4 3.3 how to install 5 3.4 the...
1 1. Important notes and precautions for use you have purchased one of our products for which we thank you. We are confident that this new appliance, modern, functional and practical, made with top quality materials, will meet all your requirements. This new appliance is easy to use but before insta...
3 2.2 main technical data & features item value item value rated thermal burden (kw) 24 rated hot water producing capacity l/min ( Δ t = 25 °c) 12 working voltage (v.Dc) 3 power voltage (v.Dc) 3 distributor: e – gas systems appliance model & size (mm) jsd 12 e 819 x 395 x 245 appliance type b b 11bs...
5 the correct position in the installation room notes: ⇒ the position of water inlet, water outlet & gas pipe shall be according to the marks on water heater body. ⇒ check carefully after installation; make sure there is no gas or water leakage. ⇒ rubber hose should not be longer than 2 m. ⇒ no wire...
7 installation of valve: valves should be installed in respect of the gas-in pipe and water-in pipe prior to their connection to the water heater. The hot water pipe should have a valve as well. After installation, testing should be carried out to ensure there are no gas and water leakage. 3.4 the p...
9 4.2.1 if you smell gas: • turn off the gas supply at the bottle • extinguish all naked flames • do not operate any electrical appliances • ventilate the area • check for leaks as detailed in section 5.2.1 if odour persists, contact your dealer or gas supplier immediately 4.2.2 burn-back (fire in b...
11 6. What to do if… 6.1 some problems can be caused by simple settings. This can easily be resolved without having to call technical assistance. If your appliance is not working efficiently: • make sure the gas cock is open • check that the knobs are set correctly and then repeat the operations giv...
13 technical assistance and spare parts before this appliance left the factory it was tested and set by specialized, expert personnel to guarantee the best functioning results. Qualified personnel must do any subsequent repairs or adjustments that may be necessary with the maximum care and attention...
The appliance was designed and manufactured in accordance to international standards and is certified as a safe appliance by the liquid petroleum gas safety association of south africa.
