E-gas JSD 12 E Instructions For Installation Manual - page 3
1
1. IMPORTANT NOTES AND PRECAUTIONS FOR USE
You have purchased one of our products for which we
thank you. We are confident that this new appliance,
modern, functional and practical, made with top
quality materials, will meet all your requirements.
This new appliance is easy to use but before installing
and using it,
it is important to read this handbook
through carefully
. It provides information for a safe
installation, use and maintenance. Keep this
handbook in a safe place for future reference.
The manufacturer reserves the right to make all the
modifications to its products that it deems necessary
or useful, also in your interests, without prejudicing its
essential functional and safety characteristics.
The manufacturer cannot be held responsible for any
inaccuracies due to printing or transcription
errors that may be found in this
handbook.
N.B.: the pictures shown in the figures in this
handbook are purely indicative...
•
This unit was designed for LP Gas at an
operating pressure of 2.8 kPa
.
•
A
suitable approved LPG regulator
that
complies with the requirements of SANS 1237
must be installed
•
The installation, adjustments and maintenance
jobs must only be carried out by qualified and
registered installer, and that this
installation
must comply with the requirements of SANS
10087-1
.
•
The manufacturer cannot be held responsible for
any harm to people or damage to things deriving
from an incorrect installation or maintenance or
from an erroneous use of the appliance. The
supplier expressly absolves itself from any
damage or injury resulting from system use.
Once the outer wrapping and the inner wrappings of
the various parts have been removed, check and
make sure that the appliance is in perfect condition. If
you have any doubts do not use the appliance and
call in a qualified person.
•
The packaging materials used (cardboard, bags,
polystyrene foam, nails, etc.) must not be left
anywhere in easy reach of children because they
are a potential hazard source. To safeguard the
environment all packaging materials are
environment friendly and recyclable.
•
Prior to connecting the appliance ensure that the
rating plate data corresponds to that of the gas
supply.
•
This
Type B
instantaneous gas water geyser
must be fitted with a secondary flue
.
•
Proper ventilation
is vital for the efficient
performance of all gas appliances, as well as for
the safety of the occupants in the room in which
the gas appliance is installed.
•
In the case of a failure and/or malfunction, all
repairs or settings must be done with maximum
care and attention by
qualified personnel
. For
this reason we recommend you call the nearest
E-Gas Assistance Centre, explaining the trouble
and giving the name of the model.
If an appliance is out of order or is not going to be
used any more, it must be rendered useless
by
eliminating those parts that could be a hazard source
for children when they are playing, for example:
•
The installation of all gas and combustion
appliances must comply to the relevant the
standards applicable.
•
The appliance must only be used for what it
has been designed. Any other use is
considered dangerous.
YOUR E-GAS WATER HEATER HAS BEEN MANUFACTURED WITH THE GREATEST CARE AND ATTENTION TO DETAIL TO
INTERNATIONAL STANDARDS AND WITH THE UTMOST REGARD FOR YOUR SAFETY. WITH PROPER CARE AND ATTENTION IT
IS DESIGNED TO GIVE YOU YEARS OF TROUBLE FREE SERVICE.
AS THIS WATER HEATER IS BEING INSTALLED AND USED OUTSIDE OF OUR CONTROL, WE CANNOT BE HELD RESPONSIBLE
FOR FAILURE OF THE UNIT OR ANY CONSEQUENTIAL DAMAGE AS A RESULT OF IMPROPER INSTALLATION, ABUSE OF THE
UNIT, DISREGARD OF THE INSTRUCTIONS, INEFFICIENT GAS REGULATORS OR DIRTY WATER FEED AND UNCONTROLLED
WATER PRESSURE.
2
2. DESCRIPTION OF THE APPLIANCE
2.1 Performance
Layout
Description
Household Instant
Gas Water Heater
Model
JSD 12 E
Front View (Cover Removed)
Flue connector
(Ø110mm )
Flue exhaust
Hang holds
Temp. limit sensor
Ignition sensor
Flame sensor
Ignition control(IC)
Solenoid valve
Battery box
Microswitch
Water valve
Gas valve
W/S gas valve
Burner
Heating
exchanger
Gas inlet (G ½”)
Water outlet (G ½”)
Water inlet (G ½”)