E Instruments AMI 300 User Manual - Iv – Menus
15
IV – Menus
2.
Launch a planned dataset
A planned dataset is composed of several locations. For each location, the operator can enter a theorical value and a tolerance for the
parameter to be controlled. Planification must be made via the software.
a. Click on OK or to enter into sub function.
b. Select Planned with
and
. Confirm wih OK.
c. Choose dataset name with
and
. Confirm wih OK.
d. Select the location with
and
. Confirm wih OK.
3. Preview of dataset graphic
a. Go to Recording menu.
b. Select Display. Click on OK to validate.
c. Select dataset name with arrow keys and . Click on OK.
Summary screen of selected dataset is displayed. From this screen, you can :
●
Select other dataset using arrow keys and .
●
Dislplay data of other channels using arrow keys and .
d. Click on OK to display selected dataset graph.
From this screen you can :
●
Browse on the curve with arrow keys and
to display values of pionts.
●
Select the channel using arrow keys and .
You can display a graph of datasets performed on the device.
Note : if selected dataset has more than 180 points, the device will display a global view of dataset. To
zoom on a dataset part, use arrow keys and press key.
The device displays graph of the interval of selected points.
Dataset summary
Dataset graph
Global graph of
dataset
4. Delete all datasets
Select Delete with
and
. Confirm wih OK.
see DataLogger-10 user manual chapter III – Read device page 6.