Summary of EPIK SE 2017
Page 1
2017 epik se user manual please read before operating your new bicycle..
Page 2
Introduction congratulations on the purchase of your new e-bike! We want to make you happy and believe your new e-bike will bring you lots of fun. We ask that you please read this manual thoroughly, paying special attention to the safety warnings before you start riding your bicycle. Please observe ...
Page 3
Warranty limited one year components warranty includes: forks, stem, handlebar, seat post, saddle, brakes, cables, bottom bracket, crank set, pedals, chain, rims, spokes, wheel hub, freewheel, cassette, derailleur, shifter, motor, throttle, controller, wiring harness, kickstand, reflectors, and hard...
Page 4
Opening your bicycle when receiving your bicycle, your package should contain the following items: ● the main body of the electric bike consisting of: ○ frame ○ rear wheel ○ gear and chain ○ rear brake ○ battery ○ rear fender ● the handlebar sub assembly ○ this subassembly is still connected to the ...
Page 5
Structure of your e-bike currently electric bicycles can be divided into two classes: tag (twist and go) and pas (pedal assistance system). The epik se belongs in the second classification. Refer to the picture below for structure and parts..
Page 6
Main specifications: epik se bike weight 42 lbs. Max capacity 300 lbs. Dimension 65” x 27” x 46” max speed 20 mph full charge distance ≤ 55 miles (depending on terrain and rider’s weight) climbing grade ≤ 10% motor description rear drive brushless hub motor max riding noise 60 db rated power 350 wat...
Page 7
Brakes there are two types of braking mechanisms that e-joe installs on its electronic bicycles, the “v-brake,” and the “disk brake.” the epik se has a disk brake installed on both the rear and front brake and is used to control the entire braking system of the bicycle, as shown in the picture below...
Page 8
Seat and handlebar safe height mark vertical handle stem position appropriate adjustments can be made for the vertical handle stem according to personal preference or driving habit, but it is forbidden to expose the infix notation (also called, the safety line). If used in an inappropriate way, it m...
Page 9
Battery and charger access battery access slot make sure the batter is properly seated against its housing in the frame. Insert the key into the lock on the top of the battery head.. Turn the key to remove/lock the battery in the frame. ● note: the keys provided are only used to lock and unlock the ...
Page 10
Bicycle battery charger and charge indicator lights to see the battery levels, use the charge indicator on the electric assist led display located on the left handlebar. The battery charger for the epik se is equipped with an led light indicator that works to help you preserve the battery life of yo...
Page 11
General operating instructions electric assist - led operating instructions when you first turn on your electric bike, your led electric assist display will automatically go into the default setting: pedal assist system (pas) will be turned on, thumb throttle will be turned on, and battery level ind...
Page 12
Before you ride for the first time: ● check that lever for the handlebar stem is properly tightened. ● check that locking lever for folding pipe is tightened and the safety clip ring is in place. ● check that the folding lever for the frame is tightened and safety clip is in place. ● check all other...
Page 13
Folding instructions the epik se can be folded for easy storage and travel. Pedals: fold the pedals by pressing the end of the pedal inward and then upwards. Folding pipe: locate the locking lever at the base of the folding pipe. First sliding the safety clip ring away from the lever, and then pull ...
Page 14
Maintenance ● important! Do not attempt to open the casings of the battery, motor, or controller; it could be dangerous and will void any warranties by doing so. If you experience and problem, please contact our service department or your retailer. ● wheel spokes should be adjusted every 300 miles o...
Page 15
Simple troubleshooting problem solutions a. Top speed too slow 1. Fully recharge battery b. Power on but motor not working 1. Reinstall battery/ replace fuse c. Driving shorter distance per recharge 1. Check tire pressures 2. Recharge completely or have charger re-inspected 3. Replace battery d. The...
Page 16
Contact us we thoroughly hope you enjoy your new e-joe bike! If you have any questions/comments/concerns, or would like to share your e-joe bike experience with us, please contact us at: telephone: 855-888-1891 email: sales@ejoebike.Com website: www.Ejoebike.Com like us on facebook! Www.Facebook.Com...