E-Pill MedSmart User & Programming Manual - page 6
6
System Description, Controls & Functions
The Docking Base is home to the MedSmart unit to provide A/C power
and to transmit data** to the server in the monitored configuration (When
monitored, the Docking Base must be connected to an active phone jack).
The MedSmart Dispensing Unit is designed to be portable within your home
and may be taken with you on long trips. However, to conserve battery life,
we recommend you keep the unit in the Docking Base.
1
A/C Power Contacts The MedSmart Unit must be properly seated
on the contacts at the rear.
2
Phone Connection
Light
**
When lit, the Docking Base is using the phone
line.
3
Power Light
When lit red light, the Docking Base has
power.
4
Help/Refill Request
Button
**
Will send a Help/Refill Request alert to the
Data Center to notify the designated message
recipient(s) that assistance is needed.
5
Quick Reference
Card
Contains user and programming information.
6
Line In Jack
**
Jack for telephone line connecting unit to a
household phone line wall jack.
7
Phone Jack
**
Jack to connect a telephone or an answering
machine.
8
Power Input
Input for provided transformer power cord.
The Docking Base
NOTE: This Docking Base does not contain an internal back-up battery
and therefore will not provide power to the MedSmart Unit when there is a
power outage or if it is not properly plugged in. To conserve battery life of
the MedSmart Unit, make certain the Docking Base is plugged in and Power
indicator light is on. Please refer to Indicator Lights and Troubleshooting
section for additional information.
** Only provided with the Monitored Docking Base.
7
8
3
4
2
5
6
1
**
**
**
**