E-Seek M300 Quick Start Manual
E-SEEK
Inc
Breakthrough Technology in Bar Code
M300 Quick Start Guide
Features
1
2D & Linear Barcode Reader
2
Full Color LCD Display
3
Power Button
4
Key Push Button
5
LED Indicator
6
Magnetic Stripe Reader
7
Smart Cart Reader
1
3
2
7
6
5
4
8
12
10
9
11
8
Reset Button
9
Speaker
10
Strap
11
Rubber Feet
12
Rechargeable Battery
13
16
14
15
13
Stylus
14
USB Host Port
15
RS232 Serial/USB Device Connector
16
Power Connector
Getting Started
1- Charge The battery
NOTE Do not turn on or connect the M300 to the computer at this
time.
NOTE Charging the battery full can take up to three hours.
The Model M300 is shipped with the rechargeable battery installed.
Connect the AC/DC power supply to the Model M300 power
connector, look for the LED indicator to be red in color. When the
LED indicator changes color to green, the battery is fully charged
and the Model M300 is ready for use.
2- Download & Install Active Sync
From Microsoft website (link below), you can download and install
latest Active Sync into the host computer.
http://www.microsoft.com/windowsmobile/activesync/default.mspx
3- Communication
A USB Cable (CN8000) is include with each unit, this cable enables
the communication between the M300 and host computer.