E.T. ET-500-PLUS User Manual - Normal Use
3
REMOTE CONTROL FEATURES
Full open - Momentarily press and release the button on your remote trans-
mitter that has been setup for full opening.
Pedestrian opening/partial open- Momentarily press and release the button
on your remote transmitter that has been setup for pedestrian access.
Autoclose override- (Not available in Condominium/Loop mode) When the
gate reaches the full open position, press and hold the full opening button
on your transmitter until the buzzer beeps confi rmation. To re-instate the
autoclose momentarily press and release the full opening button.
Holiday lockout- (Not available in Condominium/Loop mode) With the
gate in the full closed position press and hold the pedestrian button of the
remote until buzzer beeps. This will lock out any opening inputs including the
test button on the board. The buzzer will beep when attempting to operate
the motor when locked. To re-instate normal operation press and hold the
pedestrian button untilthe buzzer starts 5 long beeps to indicate unlocking.
HOW DO I RELEASE THE MOTOR TO USE MY GATE MANUALLY?
The manual release in the open position also deactivates the electronic
control. To operate the unit normally the release door must be fully closed.
Remember to gently push or pull the gate until the gearbox re-engages
before running the motor. The gears will lightly click into place.
Locked
and engaged
Insert key and turn
clockwise
Pull door to release