1. DL manuals
  2. E-TON
  3. Scooter
  4. Sport 150
  5. Owner's Manual

E-TON Sport 150 Owner's Manual

Other manuals for Sport 150: Service Manual

Summary of Sport 150

  • Page 1

    Sport 150 copyright ©2008-2009 eton america, all rights reserved..

  • Page 2

    1 1. Contents 1. Contents ........................................................................................................................ 1 2. Control location .............................................................................................................. 3 3. Before riding ....

  • Page 3

    2 1. Contents checking for fuel leakage ............................................................................................ 20 checking the lubrication of body’s various mechanisms ............................................. 20 checking the spark plug ........................................

  • Page 4

    2. Control location model: xs150t-4 150cc fuel tank cap engine stop switch/starter switch high& low beam/turn signal/horn switch front light/ position light front brake level fuses &c.D.I battery air cleaner oil level front turn signal light helmet hook storage box kick starter pedal main stand rear...

  • Page 5

    3. Before riding this manual describes the correct usage of this motorcycle including safety riding, simple inspection methods and so on. For a more comfortable and safety riding, please read this manual carefully. Y in case the motorcycle’s specifications and construction are modified and different...

  • Page 6

    5. Driving keep the related parts of your body such as arms, palms, lumbar, and toes relax and ride with the most comfortable posture in order to be able to react quickly whenever it is necessary. Rider’s posture will greatly affect riding safety. Always keep your body’s gravity in the center of the...

  • Page 7

    7. Use of each component (the following is e-ton 4 stroke air-cooling 150cc scooter’s basic operation, and they could vary from different individual models. Please consult the end of this manual.) gauges 6 caution: do not wipe plastic components, e.G. Instrument panel, headlight, with organic solven...

  • Page 8

    Operation of ignition switch “on” position: engine can be started in this position. Ignition switch key can not be removed. “off” position: engine is shut off and can not be started in this position. Ignition switch key can be removed. Operation of steering handle lock switch “steering handle lock” ...

  • Page 9

    Electric start button this is a starting motor button (switch) for engine starting. With the main switch “ on ” , press this button while holding the front or rear brake lever will start the engine. Caution: release this button immediately after engine has been starter, and never press the button ag...

  • Page 10

    Seat lock y unlock: insert the ignition switch key and turn to left to unlock. Seat lock y lock: press the seat down and it will be locked automatically. After the seat catch has been locked, check to make sure it has locked properly by lightly lifting the seat. 9 caution: y be sure to remove the ke...

  • Page 11

    Fuel tank cap the fuel tank cap is behind the seat, near the rear carrier. 1. Insert the key into the fuel tank cap, and turn the fuel cap clockwise, then the cap can be removed. 2. Do not fill above the fuel upper limit when refueling. 3. Align the “ Ƹ ” mark on the cap with the “ Ƹ ” mark on the f...

  • Page 12

    8. Important points and cautions for starting engine please check the oil and fuel levels and make sure they are adequate. To start the engine the main parking stand must be firmly on the ground and the brake is applied on the rear wheel to prevent the motorcycle from moving forward suddenly. Cautio...

  • Page 13

    9. The best way to drive off turn on the turn signal light before moving, and make sure no vehicle is coming from behind. Then, drive off. The control of throttle valve handle acceleration: to increase speed. When riding on an inclined road, turn the throttle valve handle slowly to allow the engine ...

  • Page 14

    10. Inspection and maintenance before riding (please refer to the components location diagram for the following components.) routine inspection check items check key points engine oil is there enough engine oil? Fuel is it enough? Front braking condition? (brake lever free play: 10~20mm) brake rear ...

  • Page 15

    Oil change: change engine oil after the first 300km, and change the engine oil every 1000km thereafter. Lower limit upper limit in order to maintain the engine’s maximum performance, check whether the engine oil is enough every 500km. Add oil to upper limit if the engine oil has been found to be low...

  • Page 16

    Inspection and adjustment of brake free play inspection: (brake lever free play must be checked with the engine shut off.) brake lever free play for front and rear wheels. ƹ if checking the hand-braking lever for front wheels, its free play (the stroke of hand-braking lever from no braking to initia...

  • Page 17

    Disc brakes inspection ( applicable for model equipped with disc brakes. ) visual check brake lines for leakage, or damage, check brake lines connections for looseness using a wrench or similar tool, and check whether steering handle vibration in driving, or any parts’ interference may have damage t...

  • Page 18

    Throttle valve handle clearance adjustment correct clearance allows throttle valve handle to rotate 2~6mm. 2~6 mm loosen the lock nut first, then turn the adjust nut to adjust. Tighten the lock nut securely when finished. 17 3. Check to see if the throttle valve cable is obstructed by other cables p...

  • Page 19

    Tire inspection tires should be checked and inflated with the engine shut off. If a tire’s ground contacting curve is abnormal, check it with an air pressure gauge and inflate it to the specified pressure. Tires pressure must be checked with an air pressure gauge when cold. Please refer to specifica...

  • Page 20

    Checking and changing fuses turn off ignition switch, and check fuses if they are intact. Replace the blown fuse with a new one having the same specified amperage rating (10a h 2/15a h 2). Using a fuse of more than 10 or 15 amperes, a brass or iron wire to replace a blown fuse is strictly prohibited...

  • Page 21

    Checking for fuel leakage check fuel tank, fuel cup, fuel hose, carburetor for leakage. Checking the lubrication of body’s various mechanisms check the body’s pivot points if they have enough lubrication. (for example, the pivot points on the main stand, the side stand, and the brake lever Ă ). Chec...

  • Page 22

    11. When there is an abnormal condition or a trouble diagnosis when engine does not start for front wheel for rear wheel (1). Has the ignition switch key been turned to the “on” position? (2). Is there enough fuel in the fuel tank? (3). Is the rear or front wheel brakes applied when pressing startin...

  • Page 23

    15. Cautions for riding motorcycle 1. Raise the motorcycle with the main stand, and sit on the seat. Push the motorcycle forwarding to raise the main parking stand. Never rotate the throttle valve handle at will to increase the engine rpm before driving off. Caution: 2. Get on the motorcycle from th...

  • Page 24

    16. Periodical maintenance schedule maintenance kilometer 300km every 1000km every 3000km every 6000km every 12000km item check items maintenance period new 1 month 3 months 6 months 1 year remarks 1 air cleaner element (remark) i c r(paper) r(sponge) 2 air cleaner i 3 oil filter (screen) c c 4 engi...

  • Page 25

    17. Specification model item specification sport 150 length 1800 mm width 695mm height 1125mm wheel base 1300mm net weight 106kg type 4- stroke single cylinder engine fuel unleaded(octane 90 or higher) cooling type forced air-cooled displacement 149.6 c.C. Compression ratio 9.4:1 starting methods ki...

  • Page 26

    25 18. Reporting safety defects nhtsa safety notice if you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the national highway traffic safety administration (nhtsa) in addition to notifying eton america, llc. If nhtsa re...

  • Page 27

    26 19. Warranty eton america, llc. Limited vehicle warranty eton america warrants all new eton vehicles sold by authorized eton dealers to be free from defects in materials and workmanship, subject to the following exclusions and limitations. New vehicles sold by an authorized dealer to original ret...

  • Page 28

    27 eton america, llc. Limited vehicle warranty this warranty is valid at any authorized eton dealer in the united states only. In the event you experience any problem obtaining prompt service, contact eton america, customer service department for assistance. Always consult first with your selling de...

  • Page 29

    28 eton america llc scooter/moped limited warranty federal emmission control systems eton america llc warrants each new scooter/moped vehicle that includes as standard equipment a taillight and a stoplight; a) is designed, built and equipped so as to conform at the time of initial retail purchase wi...

  • Page 30

    29 eton america llc scooter/moped limited warranty federal emmission control systems 4) limited liability. The liability of eton america llc under this emission control system warranty is limited solely to the remedying of the defects in the materials or workmanship by any authorized eton america ll...

  • Page 31

    20. Electrical diagram 31 copyright ©2008-2009 eton america, all rights reserved..

  • Page 32

    H9900-fxa0-0000 copyright ©2008-2009 eton america, all rights reserved..