Eagle Eye Tracking EagleEye Quick Start User Manual - 5. Getting Started

EagleEye Quick Start 

P a g e

 | 

5

5. Getting Started

5.1. Battery Charging 

Connect Datablaze AC Charger with the EagleEye Tracker.

Insert the AC Charger into the power socket

During charging, the PWR LED is flashing fast.  When the battery is fully charged, the 

PWR LED will be solid.

You can also charge the battery by USB cable which connects the EagleEye with the PC.

Charging time is about 5 hours.

Note: Before the first time using the EagleEye Tracker, please fully charge the battery.  

5.2. Turn on/Turn off 

(if enabled) 

Turn On:

Method 1: Press the power key for at least 3 seconds and release it to turn on the 

Eagle Eye.  At the same time, PWR LED will light on.

Method 2: Connect the EagleEye to charger or external battery, and it will turn on 

automatically, PWR LED will light on.

Turn Off: 

Method 1: Press the power key for about 2 seconds; PWR LED will flash and then 

turn off, it indicates that the EagleEye is turned off.  The time of power off is 

dependent on the quality of the network.  The maximum time of power off is 90 

seconds.  It is only valid to turn off when using the internal battery.

Method 2: If using the Datablaze external battery (DB-EXTBAT), device will power 

off when external battery disconnects.