Earlex ASG55 Operating Instructions Manual

Manual is about: Outdoor Paint Sprayer

Summary of ASG55

  • Page 1

    Asg55 55 watt electric airless spray gun operating instructions thank you for purchasing the earlex asg55 spray gun, this is a highly versatile spray gun and can be used for a variety of applications. Before use - please read the safety & operating instructions. Please retain for future reference.

  • Page 2

    Safety operating instructions please read before use l never use the spray gun outside when it is raining. L never under any circumstances aim the nozzle at another person or animal. In the event of an injury occurring seek expert medical advice immediately. L always keep the spray basket nozzle in ...

  • Page 3

    About the asg55. The asg55 is a highly versatile electric airless spray gun, it can be used with several different spray mediums including, varnishes, wood treatments, enamel paint, oil and water based paints. Airless spraying reduces the mist associated with air spraying and also reduces paint loss...

  • Page 4

    Operation turn the gun upside down and place a few drops of lubricating oil in both the apertures on the underside of the gun (see fig.8, page 5). Connect to mains and momentarily trigger the spray gun to disperse the oil around the piston and cylinder, then disconnect the asg55 from the mains and f...

  • Page 5

    Helpful hints 1. Evenly control the speed of movement of the spray gun. A fast speed will give a thin coat and a slow speed will give a heavy coat. 2. Only apply one coat at a time. If a further coat is required follow the paint manufacturers instructions for drying times. 3. If spraying small areas...

  • Page 6

    Trouble shooting problem cause action required spray gun hums piston sticking. Remove the large knob at the top of the unit part no. But does not part no. Sg237 sg266. Pull nozzle and piston assembly down and operate back to release from main gun assembly. Unscrew and remove nozzle. Remove valve ass...

  • Page 7

    Sg209 1.0mm nozzle sg211 0.6mm nozzle sg232 cylinder housing moulding sg234 piston spring 55w sg237 piston assembly sg240 suction tube and filter assembly sg242 1.0 litre paint container sg266 clamping knob sg301 valve assembly sg481 main gun assembly (complete with mains lead and fitted plug) sg243...

  • Page 8

    8 earlex ltd., moorfield road, slyfield industrial estate, guildford, surrey, gu1 1ru. Tel: 01483-454666. Fax: 01483-454548 e-mail: enquires@earlex.Co.Uk website: www.Earlex.Co.Uk warning - if you are using an extension lead, it must be rated at a minimum of 6 amps and fully unwound. Do not operate ...