1. DL manuals
  2. Earlex
  3. Paint Sprayer
  4. SPRAY STATION PRO HV 5000
  5. Operating Instructions Manual

Earlex SPRAY STATION PRO HV 5000 Operating Instructions Manual

Other manuals for SPRAY STATION PRO HV 5000: Operating Instructions Manual
Manual is about: THE COMPLETE PAINT SPRAYING SYSTEM

Summary of SPRAY STATION PRO HV 5000

  • Page 1

    Operating instructions thank you for purchasing the earlex hvlp spray kit. This is a highly versatile spray kit and can be used on a variety of applications. Before use - please read the safety & operating instructions. Please retain for future reference the complete paint spraying system l0199 09-0...

  • Page 2

    2 safety operating instructions please read before use never under any circumstances aim the nozzle at another person or animal. In the event of injury occurring seek expert medical advice immediately. The spray gun must only be used with paints and solvents that have a suitable flash point for spra...

  • Page 3

    3 key description part no. 1. Air cap ring l0151 2. Air cap l0152 3. Air distributor plate assy l0162 4. Fluid tip, 2.0mm l0157 5. Fluid tip seal l0159 6. Pivot screw l0179 7. Washer l0195 8. Main body assy l0180 9. Fluid needle 2.0mm l0166 10. Adaptor l0174 11. Spring l0175 12. Adjusting screw l017...

  • Page 4

    4 introduction hvlp stands for high volume, low pressure. This type of spraying technology allows you to spray extremely accurately without all the overspray that occurs with the high pressure tank type equipment. In fact, in some parts of the world the high pressure systems are banned by law on env...

  • Page 5

    5 operation fill the paint container with the spray medium. Take care not to overfill. Take the spray gun unit and with the clamp lever (22) turned fully anti-clockwise, locate the spray gun unit into the paint container. Rotate the container until the 2 pins locate into the recesses in the yoke (23...

  • Page 6

    6 helpful hints 1. Evenly control the speed of movement of the spray gun. A fast speed will give a thin coat and a slow speed will give a heavy coat. 2. Only apply one coat at a time. If a further coat is required follow the paint manufacturer’s instructions for drying times. 3. If spraying small ar...

  • Page 7

    7 turbine unit the turbine unit only requires minimal maintenance ensure its filter element is kept clean at all times. This is the filter underneath the main body of the motor unit (28). Disconnect the unit from the mains, turn on side and remove foam material. This can be washed out if necessary a...

  • Page 8

    8 guarantee this product is guaranteed for a period of 24 months against faulty manufacture and materials. It is not guaranteed for industrial or hire purposes. The guarantee does not affect your statutory rights. Earlex ltd. Will accept no responsibility for the use of this product if used for any ...