Tan spray station ts20 do not use equipment before reading this manual this manual contains important warnings and instructions. Please read these instructions carefully and keep for your reference. Tm.
3 1. Remove all contents from box. 2. Insert end of hose to turbine. 3. Insert hose into spray gun. Push completely in with slight pressure. 4. Fill cup with solution up to the 4 oz mark. Use no more than 2 oz per application applied in two 1 oz coats. Follow the “simple spray gun setup instructions...
4 5. Make vertical or horizontal movements (dependant on the direction of the air cap part #2) over the body. Keep the spray gun in an upright position, do not rock or tip!!!!! Proper spraying technique 6. Do not overlap a just applied part of the body; you need to give the solution time to absorb i...
