EarthQuake 600050B Operator's Manual - page 13
Operator's Manual
Rolling String Trimmer 600050V, 600050B
Check for parts online at
www.getearthquake.com or call 800-345-6007 M-F 8-5
13
how to Lubricate the Jackshaft Assembly
A grease fitting is provided to lubricate the jackshaft
assembly. Use a grease gun with automotive type
grease to lubricate the jackshaft assembly AS ShoWn
in figuRE 9.
how to Change Engine oil
Change the engine oil when the engine is warm. For
the proper oil capacity, see the engine manufacturer's
instructions. SEE figuRES 10 and 11.
NOTE: In order to change the oil in the 600050V
string trimmer model, you must remove the wheel.
1. Disconnect spark plug wire from the spark plug.
. Remove the oil drain plug as shown in Figure 10.
3. Drain all the engine oil into a flat pan.
4. Install the oil drain plug. Make sure the oil drain plug
is tight.
5. Remove the dipstick.
6. Fill the engine crankcase. do not oVERfiLL. For
proper oil capacity, see the engine manufacturer’s
Figure 11: Oil drainplug on 600050B
Figure 9: Trimmer as positioned during shipment.
grease fitting
Figure 10: Oil drainplug on 600050V
oil drain Plug
oil drain Plug