EarthQuake 600050B Operator's Manual - Assembly

Operator's Manual

Rolling String Trimmer 600050V, 600050B

Check for parts online at 

www.getearthquake.com or call 800-345-6007 M-F 8-5

7

ASSEmbLY

tools Required:

1 Knife to cut carton

1 T-handle Wrench

1 Wrench to assemble tires

waRning

ALWAYS  WEAR  SAfEtY  gLASSES  oR  EYE 

ShiELdS WhiLE ASSEmbLing thE tRimmER.

waRning

bEfoRE doing AnY ASSEmbLY oR mAintE-

nAnCE to thE tRimmER, REmoVE thE WiRE 

fRom thE SPARk PLug.

Figure 1-Your new trimmer as it is shipped to you 

The image in Figure 1 above shows the trimmer as it is 

positioned and assembled for shipment.

to Attach the tires

Attach the tires by inserting the spacer, the washer and 

the wheel.  Secure and tighten by using the axle nuts 

provided

Figure 2: Assembling tires

to Remove the trimmer from the Carton

1. Remove any of the loose parts in packaging, including 

the parts bag, from the carton.

. Remove the packing material positioned around the 

unit.

3  Cut down all four corners of the carton and lay the 

side panels flat.

4. Pull the trimmer out of the carton.

5  Remove packing material from around the trimmer 

head.

6. Remove protective plastic from front of frame.

7. Remove protective material from wheel axle.

ContEntS of PARtS bAg

1 - Owner’s Manual; and 1 - Parts Bag

t-handle 

Wrench

Safety 

glasses

two Sets of 

trimmer Lines