Table of contents care and maintenance your earthquake stereo 4-band graphic equalizer is an example of superior design and craftsmanship. The following advisories will help you care for your equalizer so you can enjoy it for years to come. Keep the parametric equalizer dry. If it gets wet, wipe it ...
3 all specifications are subject to change without notice. Www.Earthquakesound.Com 6 eq-4000bt front panel overview 4 4 3 3 2 2 5 1 7 7 1 fader use this rotary knob to blend more action into either the front or rear channels of the system. Volume control push in once to eject button then rotate to a...
Wiring configurations 4 all specifications are subject to change without notice. Www.Earthquakesound.Com aux main front rear sub out ground 12vdc antenna front rear sub - usually placed in the trunk to head unit power/12vdc stock or after market head unit (radio, stereo) auxillary source to amp remo...
Mounting instructions 5 all specifications are subject to change without notice. Www.Earthquakesound.Com all specifications are subject to change without notice. Www.Earthquakesound.Com 4x mounting ears to equalizer 5/16” (7.9375mm) machine screws mounting ears to dash board 4x 3/4” (19.05mm) tappin...
Us toll free e-mail 1-800-576-7944 tech@earthquakesound.Com tech support 6 all specifications are subject to change without notice. Www.Earthquakesound.Com input gain's position source voltage >13v 2v 1v 200mv volume control position max max max max 9 o'clock 12 o'clock 3 o'clock max 4.2v 4v 3v 600m...
7 all specifications are subject to change without notice. Www.Earthquakesound.Com warranty guidelines product/part damaged due to poor packaging or abusive shipping conditions. Subsequent damage to other products. A warranty claim will not be valid if the warranty registration card is not properly ...
Operating voltage: 10.5---16vdc idle: 280 ma recommended fuse size: 1 ampere input sources: 2 stereo rca sources, 1 phono source input sensitivity: adjustable from 100mvrms up to 14 vrms input impedance: variable from 8 kohm up to 10.2 kohm output impedance: sub channel: 510 ohm front & rear channel...
