EarthQuake EQ-4000BT Owner's Manual - page 8
Operating Voltage: 10.5---16VDC
Idle: 280 mA
Recommended fuse size: 1 Ampere
Input sources: 2 stereo RCA sources, 1 Phono source
Input sensitivity: Adjustable from 100mVrms up to 14 Vrms
Input impedance: Variable from 8 kOhm up to 10.2 kOhm
Output Impedance:
Sub channel: 510 Ohm
Front & Rear channels: 6.3 kOhm
Output Level:
Subwoofer channel: 5 Vrms @ 0.1% THD
Front & Rear channels: 4 Vrms @ 0.1% THD
T H D @ 3 Volts output: 0.05%
Frequency response: 15 - 34000Hz @ -3dB
Subwoofer frequency control range: 35 to 120Hz (@ -3db, 18dB/oct.)
Subwoofer upper cut off frequency: 100Hz
Channel separations: 68dB
Signal to noise ratio: 92dB
Center frequencies (in Hz): 50, 200, 2000, 15000
Control Range: 30~40dB (12 O'clock is the Bypass position)
Dimensions(H x W x D): 1" x 7" x 4-1/4" (Without Face Plate)
EQ-4000BT SPECIFICATIONS
EQ-4000BT FEATURES
4-band Parametric Equalizer with Bluetooth streaming capability
Fully retractable controls
iPod/MP3 Ready
Fader Action
6-channel RCA Outputs (front/rear/subwoofer)
Adjustable Master Volume Level Control
Adjustable Subwoofer Level Control
3 Input Sources
Input Gain (it Sets The Maximum Volume Level Achievable By The Front
Controls)
Gold Plated RCAs
Easy Snap On Connector
Blue Background LED
Copyright © Earthquake Sound Corporation
Earthquake Sound reserves the right to amend details of the specifications without notice.