EarthWise SOLiC 200 User Instructions - page 6
press the pause button again. Alternatively, instead of
using the pause function, the house immersion heater
switch can be used to disconnect the power. This will
need to be turned back on again to allow solar
heating to continue automatically. When the system
has been paused, the “immersion power light” will flash
green.
An override function is provided for use in both modes
to switch the immersion heater on. To turn the
immersion heater on – irrespective of whether solar
power is being generated or not – press the override
button. The SOLiC 200 will provide full mains power to
the immersion heater for 90 minutes once the override
button has been pressed. This replicates the function of
turning on the immersion heater switch. After 90
minutes has elapsed, automatic operation will resume.
To manually resume automatic operation, press the
override button again.
For more information, please visit
www.earthwiseproducts.co.uk